Blustream UEX3H-WP-EU USB 3.2 Gen1 HDBaseT EU Wall Plate Extender

Blustream
Blustream UEX3H-WP-EU USB 3.2 Gen1 HDBaseT EU Wall Plate Extender

BU-UEX3H-WP-EU

The Blustream UEX3H-WP-EU is a USB Host solution using HDBaseT™ technology for remote connectivity of USB 3.2 Gen1 devices at distances of up to 100m (330ft) over a single CAT6A cable in a dual EU/UK wall plate format. It allows 2 USB Hosts to interface with 2 local USB devices, as well as devices connected to a compatible Blustream USB HDBaseT™ Device extender.

Features & Benefits

  • USB 3.2 Gen1 HDBaseT™ Extender supporting 2 x USB Host devices and 2 x local USB Devices
  • Supports USB 3.2 signal extension up to 100m over HDBaseT™
  • Backwards compatible with USB 2.0 & 1.1 devices
  • Combined USB3.2 Gen1 data transfer rate up to 5Gbps
  • 1 x USB-A & 1 x USB-C port for connection to host devices with manual or auto switching
  • 2 x USB-A ports for connection to local devices
  • 1 x USB-C host charging port for powering host device
  • Provides up to 500mA combined power to USB devices (up to 500mA per port)
  • Configurable USB device power management via API commands
  • Bi-directional PoC (supports 12–48V; PSU supplied with Device end only)
  • HDBaseT Connector: 1 x RJ45
  • USB Host Ports: 1 x USB Type-C, female; 1 x USB Type-A, female
  • USB Device Ports: 2 x USB Type-C, female
  • USB Hops: 1 x USB hop/tier for this unit (Device end counts as separate hop/tier)
  • USB-C Charging Port: 1 x USB Type-C, female
  • Local Power Input: 1 x 2-Pin Phoenix connector
  • Firmware Upgrade: 1 x Micro-USB
  • RS-232: 1 x 3-Pin Phoenix connector
  • Power Supply: 24V/1.25A DC (supplied with Device end)
  • Dimensions (W x H x D, without faceplate): 136mm x 76mm x 46mm
  • Faceplate Dimensions (W x H x D): 146mm x 86mm x 6mm
  • Mounting Hole Spacing: UK 121mm CTC, EU 60mm CTC
  • Backbox Mounting Depth: 40mm (minimum), 47mm (recommended), UK or EU double gang