Click on the links
or scroll down

RM-KB-LCD 15/17

Rackmount LCD, Keyboard and Touchpanel

• Space saving design occupies a single rackspace
• No hassle 1 year warranty
• Easy to read bright active matrix LCD display
• LCD can be in open position for system monitoring while keyboard is in the closed position
• Standard 101, 102 key PS/2 keyboard with touchpad
• 1024 x 768 screen resolution (15” display), 1280 x 1024 (17” display)
• Rear articulating cable carriers provide cable strain relief

Back to Top

RM-MM

Computer Monitor Rackmount

• Adjustable clamps accommodate most 14" to 17" monitors
• Clear plexi window protects screen
• Hinged door provides access to controls
• 9 space (15.75")

Back to Top

RM-KB

Rackmount Computer Keyboard

The slide-out RM-KB rackmount computer keyboard occupies one rackspace and includes a high-quality, full 101 key AT style keyboard, with trackball and padded wrist-rests. The articulating arm provides effective cable management.

Complete with 12’ keyboard and trackball cables, including PS/2 and USB adapter. Finished in a durable black powder coat.

Back to Top

KB-SS

Keyboard Sliding Shelf

The KB-SS rackmount computer keyboard shelf occupies 1-3/4" (1 rackspace) and accommodates most standard small-pattern keyboards. The shelf provide a 15-15/16" useable width. An articulating arm hinges to provide effective cable management. Finished in durable black powder coat.

Back to Top

Front Loading Media Holders

Store DATs, CDs, DVD's, VHS tapes, cassettes, laser discs and other recorded media in our rackmount media holders. Partitioned to prevent the contents from tipping, each model features a 16-gauge flanged aluminum face and a choice of a silver brushed and anodized, black brushed and anodized or textured black powder coat finish. All stored media protrudes 3/8" to allow quick retrieval.

	Silver Anodized Part #	Black Anodized Part No	Black Textured Part #	Fits	Racking Height	Depth
	CCD	CD	TCD	40 Compact Disks	7" (4 space)	5-3/4"
	CCS	CS		25 audio cassettes	5-1/4" (3 space)	3"
	CDAT	DAT		27 DAT tapes	5-1/4" (3 space)	2-9/16"
	CVHS	VHS	TVHS	14 VHS tapes in regular case	8-3/4" 5 space)	4-13/16"
	CVSH-L	VHS-L		13 VHS in large padded case	10-1/2" (6 space)	5-9/16"
	CCD-1	CD-1		6 compact disks	1-3/4" (1 space)	5-1/2"
	CLP	LP		Laser Discs, LP's, Binders	14" (8 space)	12-9/16"
	CDVD	DVD		28 DVD discs	8-3/4" (5 space)	5-1/2"

Back to Top

DC, D and TD
Heavy Duty Drawers

Installed keylock available optionally, just suffix the
desired part number with the letters "LK" when ordering.

Two, three and four space drawers have been updated to include NEW no-slip drawer mat and rear cable grommet.

Back to Top

Media Partitions for
D, TD and UD Drawers

Partition your D, TD, and UD series drawers for media storage. Snap-together fit is also handy for small parts and miscellaneous hardware.

Back to Top

Safely secure gear in our rackmount LBX series lockboxes. 9" deep, 3 and 4 space models are offered with a durable black powder coat finish

Back to Top

Customizable foam inserts can be modified to hold any accessory tightly in place. Protects sensitive equipment and tools from shifting or becoming damaged when drawers are opened and closed. Fits any Middle Atlantic Products drawer.

Back to Top

Drawer contents will always remain inside with the fully enclosed design of our UD series rackmountable utility drawers. Full extension ball bearing slides smoothly extend a full 14" to reveal inside dimensions measuring 15 7/8 wide by 14 1/2" deep. Storage height is only 1/2 less than the actual racking height. Each model comes with a face mounted drawer pull. A user-installed latch and keylock are optionally available. Black powder coat finish.

Back to Top

These easy-to-install shelves fit all components up to 17 3/8" wide to quickly meet all of your rackmounting needs. Made from 16-gauge steel, each unit is individually boxed.

Back to Top

For components which require captivation, our RC and CAP series clamping rackshelves offer an economical and highly functional solution. Equipped with rubber-lined clamps which secure your component from the top, all RC and CAP series products are additionally outfitted with adjustable “L” brackets in back to provide an optimally secure fit. Vented bottoms offer superior cooling, while a robust 16-gauge steel design maintains structural integrity even on the road.

Back to Top

This rackshelf has been designed to provide superior ventilation for both cable and satellite boxes as well as other components that generate considerable amounts of heat. Featuring two adjustable foam padded mounting bars on the bottom and two adjustable foam padded clamping bars on top for securing components without fear of scratches, this rackshelf saves both space and money by eliminating the need to vent panels between each shelf. Constructed from 16-guage steel and finished in a durable black powder coat.

Back to Top

Designed expressly for use in our Slim 5 , AXS, SRSR, WR, BRK and OBRK equipment racks, SH Series zero space rackshelves feature full-depth front and rear rackmounting, providing a secure shelf for non-rackmount components. A truly unique design, these zero space shelves actually mount to the sides of the rackrail (not the threaded face) providing more useable shelf area and feature up to a robust 250 lb. weight capacity, depending on model. Two handy "L" brackets are included to help position equipment. Constructed from 16-gauge steel, includes mounting hardware, and is finished in a durable black powder coat.

Back to Top

Vented 3 Space Rackshelf

17 3/4” deep by 5 1/4” high, our vented rackshelf has a 60 lb. weight capacity and a rear flange slotted for horizontal cable management. Made from 16-gauge steel, finished in a black powder coat.

Back to Top

Vented 2 Space Centre- Mount Shelf

Ideal for use in our relay racks, this vented 3 1/2” (2 space) shelf is 18” deep with a 50 lb. weight capacity. Constructed from 16-gauge steel, finished in a durable black powder coat.

Back to Top

Rackshelf for half rack components

Now you can mount half-rack components, wireless units, and other gear horizontally with our UTR1 half-rack shelf. A universal mounting hole pattern accommodates virtually any half or third space component, equipment mounting hardware included. Constructed from 16-gauge steel, finished in a durable black powder coat with a 25 lb. weight capacity.

Back to Top

Our KD series rackshelves ship knocked-down to minimize freight costs and save storage space. Made from heavy 16-gauge steel, the ventilated bottoms measure up to 20 1/2” deep. Ear heights range from 2 to 10 spaces. All assembly hardware included.
NOTE - Rack ears and shelf must be ordered separately.

Back to Top

Unlike standard adjustable shelves, the entire VSA shelf telescopes to reach rear rail, providing a range of useable depths from 16” to 44”. Providing the greatest useable depth in its class, the heavy-duty VSA is ideal for even the deepest components. Constructed of hemmed 16-gauge steel and finished in a durable black powder coat, the VSA is fully vented for superior cooling and features many tie points for enhanced cable management.

Back to Top

The most versatile, heavy-duty shelf available!

With a range of front to rear mounting adjustment range from 19-1/2" - 28” deep, the versatile AS3-22 shelf rackmounts most video decks. Knock-down for freight and space economy, this 5-1/4” (3 space) video shelf supports 500 lbs. Shelf surface is 22-1/4” deep.
Note:Fits in racks with a minimum 25" overall depth

Back to Top

At only 2 rackspaces high (3-1/2"), the VDS shelf is a fully vented mounting solution for virtually any video component. Built expressly for heavy and deep equipment, this shelf has a range of front to rear mounting adjustment from 23.5" to 32". Featuring a substantial 350 lb. capacity, it is equipped with telescope rear railmounts.

Note: Fits in racks with a minimum 25.5" overall depth

Back to Top

A 50 lb. capacity and heavy-duty 16-gauge steel construction are two of the defining features which make our model SS sliding shelf both functional and rugged. Capable of latching in an open or closed position, the shelf slides on ball bearings to an extended length of 14”. A telescopic rear support mounts the shelf to any rack. Occupies slightly more than a single rack space.

Back to Top

Filling just a single rack space, our low profile SSL sliding shelf extends 11" on 3/4" nylon roller slides equipped with positive-stop lockouts. A telescopic rear support mounts to any rack. The shelf itself is made with an attractive black laminate material. 35 lb. weight capacity.

Back to Top

At only 2 rackspaces high (3-1/2"), the VDS shelf is a fully vented mounting solution for virtually any video component. Built expressly for heavy and deep equipment, this shelf has a range of front to rear mounting adjustment from 23.5" to 32". Featuring a substantial 350 lb. capacity, it is equipped with telescope rear railmounts.
Note: Fits in racks with a minimum 25.5" overall depth

Back to Top

Accommodating components too wide to fit the 17-3/8" inside width of standard rackshelves, these shelf systems fit units up to 22-1/2" wide, and either bolt into millwork or to the mounting angle of standard rackrail. Occupies 3 rackspaces, the WUSS system comes complete with a pair of ears, a bottom, and appropriate assembly hardware.
50 lb. Weight Capacity.

Back to Top

Fixed Writing/Computer Keyboard Shelf

The FWS fixed writing/computer keyboard shelf bolts quickly to any 19” rack to create an ideal workspace. With an attractive, black laminate top made from 3/4” furniture-grade MDF board, it occupies 2 rackspaces and comes complete with special rail-mounting hardware.

Back to Top

Wall mounting non-rackmount components is much easier with our WMS wall mount shelf. Featuring a fully welded design using 16-gauge steel, the unit’s 200 lb. capacity gives it unrivaled strength in its class. With a vented bottom to help keep things cool, both 1/2” and 3/4” electrical knockouts are provided for your convenience.

Back to Top

The UNI Series laser-cut connector panels feature knockouts that are designed to accept a number of connectors, including XLR and Neutrik. Our innovative design lets you mount both male and female connectors to the same holes simply by knocking out the correct pattern. Made from one-piece flanged steel, black powder coat finish.

Back to Top

With its aesthetically-balanced, screwless flush-mounted faceplate, our CH chassis features a 16-gauge all-steel body finished in a black powder coat. Front and rear panels are made from 16-gauge aluminum for easy machining. The front faceplate additionally features a brushed and black anodized finish, while the rear faceplate is finished in black powder coat.

Back to Top

Providing a high quality rack chassis at an affordable price, the EC series features a quick-to-disassemble two piece design incorporating a 16-gauge steel face, back and bottom, and 20-gauge steel top and sides. Black powder coat finish.

Back to Top

Available in 2, 4, and 6 space models, these access panels provide quick passage to rack interiors. Fabricated from easily machinable .090 black powder coated aluminum, these access panels are perfect for those situations where access to the rear of connector panels is required. Captive thumbscrews require no tools and will not get lost.

Back to Top

Our keylocked steel security doors allow front access to a select portion of rackmount equipment and are available in plexiglass, vented, and solid steel styles. Mount equipment which needs to be secured behind the solid door to keep unauthorized users from tampering. Keep equipment which needs to be client accessed in the open portion of the rack. Works as a full door on our RK/BRK series racks as well.

Back to Top

Incorporating a steel frame and a keylocked 3/16” smoked-grey plexiglass door, our SECL series locking security covers are offered in 2, 3, 4, and 8 space sizes. Each unit’s depth of 1 1/2” easily clears controls on most equipment.

Back to Top

Eliminate the prospect of any tampering with these tough security covers. Offered in large or fine perforation styles (models S and SF respectively), each cover is 1” deep. Includes installed rubber edging that won’t mar the equipment you’re trying to protect. To enhance the level of security, use our security rack screws.

Back to Top

SL series security covers feature a permanent plexiglass window for easy equipment viewing. Secure and cost-effective - available in 1, 2, and 3 space sizes, 1” deep.

Back to Top

Available in your choice of flanged or flat style, these economical steel blank panels feature a rugged black powder coat finish.

Back to Top

The lightweight, 16-gauge aluminum construction found in the PBL series makes for easy machining. Flanged for extra strength, black powder coat finish.

Back to Top

A flat, lightweight 11-gauge aluminum design makes every PHBL series blank panel easy to machine. Durable black powder coat finish.

Back to Top

A textured black powder coat finish is used throughout our SB series. Flanged for strength, each model is made from 16-gauge steel.

Back to Top

An attractive series of blank panels, BL products utilize a 16-gauge aluminum flanged design. Easy to machine, black brushed and anodized.

Back to Top

Eye-pleasing aesthetics and flat, 11-gauge aluminum construction combine in this easy-to-machine series of blank panels. Black brushed and anodized or Silver brushed and anodized finish.

Back to Top

This NEW vent panel is the ideal solution for installations where a high open percentage area (68%) vent is needed, and it is desirable to conceal the internal cabling. Includes light blocking material, constructed from 16-gauge perforated steel, flanged for extra strength, and finished in black powder coat.

Back to Top

With the highest percentage of open area found on any of our vent panels (63%), all VT series products are made from 16-gauge perforated steel, and are flanged for extra strength. Black powder coat finish.

Back to Top

The tight perforated pattern found in the VTF series of vent panels limits viewing for aesthetics. Flanged, made from 16-gauge steel. Black powder coat finish.

Back to Top

Value in a flanged design utilizing 16-gauge steel construction. Black powder coat, black brushed and anodized or silver brushed and anodized finish.

Back to Top

Highly aesthetic with an attractive slotted design, the VTP series is flanged and made from 16-gauge aluminum. Black brushed and anodized or silver brushed and anodized finish.

Back to Top

Cable friendly HPQ series screws are 3/8" long with 10-32 threads and feature a rounded end to allow wires to be dressed inside front rackrail without chafing. Featuring an attractive Phillips truss head, finished in black oxide.

Back to Top

Available exclusively from Middle Atlantic Products! Our highest security screws feature a unique square post drive. 10-32 by 3/4", all screws have a self-guiding pilot point, and include factory installed nylon washers, in lots of 100. Black oxide finish.

Back to Top

Our HP series rackscrews are 3/4" long with 10-32 threads and feature an attractive Phillips truss-head for a clean modern appearance. All screws have a self-guiding pilot point, include factory installed nylon washers for convenience and are heat-treated for strength and to resist against stripping. Quantity lots of 500 come in a reusable plastic storage jar. Finished in black oxide or silver.

Back to Top

Our HW series rackscrews are 3/4" long with 10-32 threads and feature an attractive Phillips trim-head for those who prefer the older classic style screw. All screws have a self-guiding pilot point, include factory installed nylon washers for convenience and are heat-treated for strength and to resist against stripping. Quantity lots of 500 come in a reusable plastic storage jar. Finished in black oxide

Back to Top

These 10-32 by 3/4” security screws feature a star post drive. All screws have a self-guiding pilot point, black oxide finish and come with factory installed nylon washers in lots of 50. Star post drive bits available.

Back to Top

Our tamper-resistant, square-drive 10-32 by 3/4” screws are offered in lots of 100. Black oxide finish with factory installed nylon washers and self-guiding pilot points. Square drive bits available.

Back to Top

No time for rack space math? Use our rack ruler instead. It’s a genuinely handy tape measure incremented in both rack spaces (red) and inches (black) down to 1/32” scale. Measuring 1/2” wide by 96” (8 feet) long, its Mylar-coated retracting steel tape is housed in a tough ABS case with a thumb lock and belt clip. This is a rugged tool, not a toy.

Back to Top