GRAFIK® Eye 3000 Series

Multi-Scene Preset Dimming Controls

4 Scenes and 2, 3, 4, or 6 Zones, expandable to 16 scenes and 48 zones.

• Can link up to 8 GRAFIK® Eye Control Units (8 addresses) for up to 48 zones
• Up to 16 Accessory Controls for total of 24 control points
• Built-in Infrared Receiver/Optional Infrared Wireless Remote Control
• Can increase individual zone capacities to 800 W/VA at 120V/277V. Total capacity 2300 W/VA.
• Power Interfaces are sometimes necessary to allow the Grafik Eye to control certain load types, for example:
  • The PB (Power Booster Interface) increases a Control Unit’s zone load capacity for Incandescent/Halogen (Tungsten), Magnetic Low Voltage, Neon/Cold Cathode and Lutron Tu-Wire load types.
  • The ELVI Interface enables a zone of the Control Unit to control Electronic Low-Voltage loads.
  • The GRX-TVI gives GRAFIK Eye 3000 Series Control Units the ability to control any 0-10V ballasts powered by 100V-277V (ballast must provide 0-10V sourcing of current) and provides switching relays that can handle the in-rush current for a circuit of ballasts.

Back To Top

GRAFIK® Eye QS

Experience Graphic Eye® QS now!

Fully customisable preset light and shade control system

Set your lights and shades just right for any task or activity in any room, in any building, worldwide — commercial, institutional, or residential. Easily recall these settings with the touch of a button. The new GRAFIK® Eye QS provides convenient control and enhancement of the visual environment for the people inside the space.

• Control your blinds - Backlit labelled blind control buttons
• Control your lights - Backlit labelled buttons for selecting scenes, with or without blinds
• Backlit zone buttons - Raise or lower each group of lights. LEDs indicate the current light level for each zone
• Infrared Remote Control - Provide hand-held control with an infrared remote
• Time Clock - Provides scheduling to meet energy code requirements
• Information display - Easily read energy savings, lighting levels, and time clock information
• Colour options - Available in multiple colours for endless combinations that will accent any décor

Connections to:

• Infrared receiver
• Personal computer
• Occupancy sensor (no power supply needed)
• A/V and building management systems via RS232/ethernet interface
• Accessory wallstations
• Additional GRAFIK® Eye® QS control units

For further information click here

Back To Top

GRAFIK® Eye QS Wireless

Customisable preset light, blind and energy control

GRAFIK® Eye QS is a powerful, customisable preset lighting control system that allows you to adjust lights and blinds for any task or activity. GRAFIK® Eye QS helps you save energy, as well as meet the aesthetic, functional, or regulatory needs of any project or space.

Now incorporating Lutron’s ultra-reliable Clear Connect RF wireless technology, GRAFIK® Eye QS wireless saves you time and costs by eliminating wiring to sensors, blinds and additional GRAFIK® Eye QS wireless units. GRAFIK® Eye QS models are now available with an integral bus supply for DALI compliant lighting for direct control of digital addressable ballasts.

Features:

• Control your lights: Backlit engravable buttons for selecting scenes, with or without shades. (changeable in the field)
• Infrared remote control: Provides handheld control with a wireless remote.
• Time clock: Provides scheduling to meet energy code requirements. Includes after-hours mode option.
• Control your shades: Backlit engravable blind control buttons. (changeable in the field)
• Backlit zone buttons: Raise or lower each group of lights. LEDs indicate current light level for each zone.
• Multiple zones: Control up to 16 individual DALI compliant zones (up to 6 zones with non-DALI models)
• Information display: Easily read energy savings, lighting levels, and time clock information.
• Backlit master override buttons: Temporarily raise and lower light levels of a complete scene.
• NEW RF Transceiver: Allows wireless connectivity to other wireless devices

What are the benefits?

• Energy saving and environmentally friendly: Reduce lighting energy use with built-in timeclock, dimming, and occupancy and daylight sensing

Easy to design and integrate

• Integrates with 3rd party devices for control of AV, HVAC, and other building management systems
• Connects directly to Sivoia® QS blinds, occupancy and daylight sensors, wallstations, and DALI compliant lighting

Flexible and scalable

• Easily reconfigure to meet the changing needs of a space
• Add multiple components to grow the capabilities of the system
• Add Quantum® for total light management of an entire building

For further information click here

Back To Top

Lutron GRAFIK® Integrale Multi-Screen Preset Lighting Control System

• Set up and Recall
  Create lighting scenes for common activities all at the touch of a button.
• Smooth Transitions
  Fade between lighting scenes – from instantly to one hour.
• Expand the System
  Accessory controls allow one-touch control from any location.
• Integration
  Integrates easily with touchscreens and other AV equipment.
• RTISS™ Technology Included
  Compensates for incoming line voltage variations, frequency shifts, harmonics, and line noise.
• One Control
  Just one model provides control of all modern light sources.
• Reliability
  Control is able to withstand short between load hot and either load neutral or earth without damage.

For more information please click here

Back To Top

A versatile, energy saving lighting control solutions that is easy to install and easy to grow

Energi Savr Node QS is a simple, programmable solution for controlling light and saving energy in any commercial space. Use Energi Savr Node QS to control DALI (digitally addressable lighting interface), 0-10 V or switching ballasts, and connect occupancy sensors, daylight sensors, and wallstations for total light control.

What are the benefits?

Easy to install and maintain

• Easy and intuitive system programming application designed for the Apple iPhone or iPod touch mobile digital devices 1
• For simple applications, preconfigured modes reduce installation time and eliminate system programming
• Automatic ballast replacement eliminates the need for system reprogramming when replacing ballasts (feature available only on DALI version)

Scalable

• Control a single space, up to an entire floor with one module and add additional Energi Savr Node QS modules to control multiple floors
• Modules can link with Quantum® for total light management throughout an entire building
• Versatile
• DALI ballast control offers flexibility for reconfiguring frequently changing spaces (feature available only on DALI version)
• Great for retrofi t solutions or new construction – install each module locally – no need to connect to a central panel IMPROVES COMFORT AND PRODUCTIVITY
• Ensure the right visual environment for any activity and boost productivity by 5%–10%
• Energy saving and environmentally friendly
• Reduce lighting energy use with dimming, occupancy sensing, and daylight harvesting

Key features:

• QS link connects wallstations, additionalEnergi Savr Node QS™ modules, other QS devices, and Quantum® to easily scale from a single space to an entire building
• Programming port links to Apple iPhone or iPod touch mobile digital devices for system programming (via wi-fi router by others)
• Ballast connection to DALI, 0-10 V or switching ballasts (DALI model shown)
• DIN rail mountable back of Energi Savr Node QS easily snaps to DIN rail
• IR receiver connection enables personal control for improved comfort and productivity
• Sensor connection links to occupancy and daylight sensors for automatic energy savings
• Front panel simplifies installation, troubleshooting, and diagnostics:

• LEDs provide a simple way to confirm each connection
• Test button quickly confirms that fixtures are wired correctly and that ballasts communicate properly
• Easily assign wallstations to zones or loops at the touch of a button

For further information click here

Back To Top