TP-45

Component or Computer Graphics Video with Audio over Twisted Pair Transmitter & Receiver TOOLS

The TP-45 and TP-46 are a twisted pair transmitter and receiver for component video (YUV) or computer graphics video and unbalanced stereo audio or S/PDIF audio signals. The TP-45 transmitter converts an audio and video to a twisted pair signal and the TP-46 converts the twisted pair signal back into an audio and video signals.

Paired Receivers: TP-46

• Resolution - Up to UGXA (15-Pin HD) and 1080p (Component).
• HDTV Compatible.
• Level (Gain) & EQ (Peaking) Controls (TP-46).
• Sync Polarity Settings (TP-46) - H & V switches for improved HDTV compatibility with the CAT5 outputs.
• Power Connect™ System - Only one unit in a system, either the transmitter or the receiver needs to be connected to a power source.
• Link LED (TP-46) – Indicated the receiver is receiving a signal.
• System Range - Up to 100 meters (330’).
• Cable - UTP (unshielded twisted pair) such as CAT5.
• Compact Size - Part of the Kramer TOOLS™ family of compact, high quality and cost effective solutions.

For more information, please click here.

Back to Top

707

Component or Computer Graphics Video with Audio over Twisted Pair Transmitter & Receiver TOOLS

The 707 and 708 are a twisted pair transmitter and receiver for composite video and unbalanced mono audio signals. The 707 transmitter converts a composite video and audio signal to a twisted pair signal and the 708 receiver converts the twisted pair signal back into composite video and audio signals.

• Bandwidth - 58MHz (- 3dB) at 400 Meters.
• Twisted Pair Connectors - RJ-11 (phone).
• Level (Gain) and EQ (Peaking) Controls (708).
• Looping Input (708).
• Selectable Input Signal Termination (708).
• Audio Input Level (707) - Line or condenser mic (selectable).
• INV Polarity Switch (708) - Inverts the incoming polarity.
• System Range - Up to 1000 meters (3200’).
• Cable - UTP (unshielded twisted pair) such as CAT5.
• Compact Size - Part of the Kramer TOOLS™ family of compact, high quality and cost effective solutions.

For more information, please click here.

Back to Top

711N

Composite Video & Stereo Audio over Twisted Pair Transmitter & Receiver - TOOLS

The 711N and 712N are a twisted pair transmitter and receiver for composite video and unbalanced stereo audio signals. The 711N transmitter converts composite video and stereo audio to a twisted pair signal and the 712N receiver converts the twisted pair signal back into composite video and stereo audio signals.

• Bandwidth - 85MHz (- 3dB).
• Twisted Pair Input/Outputs - RJ-45 Connectors
• Looping Input - 712N (RJ-45)
• Selectable Input Signal Termination - 712N.
• Level (Gain) and EQ (Peaking) Controls - 712N.
• Power Connect™ System - Only one unit in a system, the transmitter or the receiver needs to be connected to a power source.
• System Range - Up to 400 meters (1200’).
• Cable - UTP (unshielded twisted pair) such as CAT5.
• Compact Size - Part of the Kramer TOOLS™ family of compact, high quality and cost effective solutions

For more information, please click here.

Back to Top

712N

Composite Video & Stereo Audio over Twisted Pair Transmitter & Receiver - TOOLS

The 711N and 712N are a twisted pair transmitter and receiver for composite video and unbalanced stereo audio signals. The 711N transmitter converts composite video and stereo audio to a twisted pair signal and the 712N receiver converts the twisted pair signal back into composite video and stereo audio signals.

• Bandwidth - 85MHz (- 3dB).
• Twisted Pair Input/Outputs - RJ-45 Connectors
• Looping Input - 712N (RJ-45)
• Selectable Input Signal Termination - 712N.
• Level (Gain) and EQ (Peaking) Controls - 712N.
• Power Connect™ System - Only one unit in a system, the transmitter or the receiver needs to be connected to a power source.
• System Range - Up to 400 meters (1200’).
• Cable - UTP (unshielded twisted pair) such as CAT5.
• Compact Size - Part of the Kramer TOOLS™ family of compact, high quality and cost effective solutions.

For more information, please click here.

Back to Top

TP-9

Video and Audio over Twisted Pair Transmitter with IR Repeater TOOLS

The TP-9 and TP-10 are a twisted pair transmitter and receiver set for composite or s-Video (Y/C) signals and unbalanced analog stereo or S/PDIF digital audio signals. The TP-9 transmitter converts the video and audio to a twisted pair signal and the TP-10 converts the twisted pair signal back into video & audio signals.

• Bandwidth - > 70MHz (-3db)
• Audio - S/PDIF or unbalanced analog
• IR Repeater - 2 IR emitter Outputs (TP-9) & 1 sensor (TP-10)
• Twisted Pair Input/Outputs - RJ-45 connector
• System Range - up to 100 meters (320’)
• Cable - UTP (unshielded twisted pair) such as CAT5.
• Level (Gain) & EQ (Peaking) Controls - TP-10
• Compact Size - Part of the Kramer TOOLS™ family of compact, high quality and cost effective solutions

For more information, please click here.

Back to Top

TP-46

Component or Computer Graphics Video with Audio over Twisted Pair Transmitter & Receiver - TOOLS

The TP-45 and TP-46 are a twisted pair transmitter and receiver for component video (YUV) or computer graphics video and unbalanced stereo audio or S/PDIF audio signals. The TP-45 transmitter converts an audio and video to a twisted pair signal and the TP-46 converts the twisted pair signal back into an audio and video signals.

Paired transmitters: TP-45

• Resolution - Up to UGXA (15-Pin HD) and 1080p (Component).
• HDTV Compatible.
• Level (Gain) & EQ (Peaking) Controls (TP-46).
• Sync Polarity Settings (TP-46) - H & V switches for improved HDTV compatibility with the CAT5 outputs.
• Power Connect™ System - Only one unit in a system, either the transmitter or the receiver needs to be connected to a power source.
• Link LED (TP-46) – Indicated the receiver is receiving a signal.
• System Range - Up to 100 meters (330’).
• Cable - UTP (unshielded twisted pair) such as CAT5.
• Compact Size - Part of the Kramer TOOLS™ family of compact, high quality and cost effective solutions.

For more information, please click here.

Back to Top

708

Video-Audio Line Receiver - TOOLS

The 707 and 708 are a twisted pair transmitter and receiver for composite video and unbalanced mono audio signals. The 707 transmitter converts a composite video and audio signal to a twisted pair signal and the 708 receiver converts the twisted pair signal back into composite video and audio signals.

• Bandwidth - 58MHz (- 3dB) at 400 Meters.
• Twisted Pair Connectors - RJ-11 (phone).
• Level (Gain) and EQ (Peaking) Controls (708).
• Looping Input (708).
• Selectable Input Signal Termination (708).
• Audio Input Level (707) - Line or condenser mic (selectable).
• INV Polarity Switch (708) - Inverts the incoming polarity.
• System Range - Up to 1000 meters (3200’).
• Cable - UTP (unshielded twisted pair) such as CAT5.
• Compact Size - Part of the Kramer TOOLS™ family of compact, high quality and cost effective solutions.

For more information, please click here.

Back to Top

TP-10

Video and Audio over Twisted Pair Receiver with IR Repeater TOOLS

The TP-9 and TP-10 are a twisted pair transmitter and receiver set for composite or s-Video (Y/C) signals and unbalanced analog stereo or S/PDIF digital audio signals. The TP-9 transmitter converts the video and audio to a twisted pair signal and the TP-10 converts the twisted pair signal back into video & audio signals.

• Bandwidth - > 70MHz (-3db)
• Audio - S/PDIF or unbalanced analog
• IR Repeater - 2 IR emitter Outputs (TP-9) & 1 sensor (TP-10)
• Twisted Pair Input/Outputs - RJ-45 connector
• System Range - up to 100 meters (320’)
• Cable - UTP (unshielded twisted pair) such as CAT5.
• Level (Gain) & EQ (Peaking) Controls - TP-10
• Compact Size - Part of the Kramer TOOLS™ family of compact, high quality and cost effective solutions

For more information, please click here.

Back to Top

703xl

Quad Video Line Transmitter - Desktop

The 703xl is a twisted pair transmitter for composite video signals. It will convert up to 4 composite video inputs to 4 twisted pair outputs which will be converted back to composite video when used in conjunction with the 706xl twisted pair receiver.

Paired Receivers: 706xl

• Bandwidth - 12MHz (- 3dB) at 300 meters (980’).
• Twisted Pair Output - Terminal block connector.
• Level (Gain) and EQ (Peaking) Controls.
• Looping Inputs.
• Selectable Input Signal Termination.
• System Range - Up to 1000 meters (3200’).
• Cable - UTP (unshielded twisted pair) such as CAT5.
• Desktop Size - Compact size. Two units can be rack mounted side-by-side in a 1U rack space with the optional RK-80 adapter.

For more information, please click here.

Back to Top

705xl

Dual Video Line Transmitter System - TOOLS

The 705xl and 706xl are a twisted pair transmitter and receiver for composite video signals. The 705xl transmitter converts a composite video signal to two twisted pair signals and the 706xl receiver converts the twisted pair signals back into two composite video signals.

Paired Receivers: 706xl

• Bandwidth - 12MHz (- 3dB) at 300 meters (960’).
• Twisted Pair Input/Outputs - Terminal Block Connector.
• Level (Gain) and EQ (Peaking) Controls (705xl/706xl).
• Looping Input (705xl/706xl).
• Selectable Input Signal Termination (705xl/706xl).
• System Range - Up to 1000 meters (3200’).
• Cable - UTP (unshielded twisted pair) such as CAT5.
• Compact Size - Part of the Kramer TOOLS™ family of compact, high quality and cost effective solutions.

For more information, please click here.

Back to Top

706xl

Dual Video Line Transmitter System - TOOLS

The 705xl and 706xl are a twisted pair transmitter and receiver for composite video signals. The 705xl transmitter converts a composite video signal to two twisted pair signals and the 706xl receiver converts the twisted pair signals back into two composite video signals.

Paired transmitters: 703xl, 705xl

• Bandwidth - 12MHz (- 3dB) at 300 meters (960’).
• Twisted Pair Input/Outputs - Terminal Block Connector.
• Level (Gain) and EQ (Peaking) Controls (705xl/706xl).
• Looping Input (705xl/706xl).
• Selectable Input Signal Termination (705xl/706xl).
• System Range - Up to 1000 meters (3200’).
• Cable - UTP (unshielded twisted pair) such as CAT5.
• Compact Size - Part of the Kramer TOOLS™ family of compact, high quality and cost effective solutions.

For more information, please click here.

Back to Top

709

YC Line Transmitter - TOOLS

The 709 and 710 are a twisted pair transmitter and receiver for s-Video (Y/C) signals. The 709 transmitter converts an s-Video (Y/C) signal into a twisted pair signal and the 710 receiver converts the twisted pair signal back into an s-Video (Y/C) signal.

Paired Receivers: 710

• Bandwidth - 8.4MHz (- 3dB) at 200 meters.
• Twisted Pair Input/Outputs - Terminal Block Connector.
• Level (Gain) and EQ (Peaking) Controls (709/710).
• Looping Input (710).
• Selectable Input Signal Termination (710).
• System Range - Up to 100 meters (320’).
• Cable - UTP (unshielded twisted pair) such as CAT5.
• Compact Size - Part of the Kramer TOOLS™ family of compact, high quality and cost effective solutions.

For more information, please click here.

Back to Top

710

YC Line Receiver - TOOLS

The 709 and 710 are a twisted pair transmitter and receiver for s-Video (Y/C) signals. The 709 transmitter converts an s-Video (Y/C) signal into a twisted pair signal and the 710 receiver converts the twisted pair signal back into an s-Video (Y/C) signal.

Paired transmitters: 709

• Bandwidth - 8.4MHz (- 3dB) at 200 meters.
• Twisted Pair Input/Outputs - Terminal Block Connector.
• Level (Gain) and EQ (Peaking) Controls (709/710).
• Looping Input (710).
• Selectable Input Signal Termination (710).
• System Range - Up to 100 meters (320’).
• Cable - UTP (unshielded twisted pair) such as CAT5.
• Compact Size - Part of the Kramer TOOLS™ family of compact, high quality and cost effective solutions.

For more information, please click here.

Back to Top

TP-41

Component - S/PDIF Line Transmitter - TOOLS

The TP-41 and TP-42 are a twisted pair transmitter and receiver for component video (YUV) and S/PDIF audio signals. The TP-41 transmitter converts component video (YUV) and S/PDIF audio signals into a twisted pair signal and the TP-42 converts the twisted pair signal back into a component video (YUV) and S/PDIF audio signals.

Paired Receivers: TP-42, TP-43

• Bandwidth - 30MHz (- 3dB).
• Twisted Pair Connectors - RJ-45 connector.
• Level (Gain) and EQ (Peaking) Controls (TP-41/TP-42).
• System Range - Up to 100 meters (> 300’).
• Cable - UTP (unshielded twisted pair) such as CAT5.
• Compact Size - Part of the Kramer TOOLS™ family of compact, high quality and cost effective solutions.

For more information, please click here.

Back to Top

TP-45

Component or Computer Graphics Video with Audio over Twisted Pair Transmitter & Receiver - TOOLS

The TP-45 and TP-46 are a twisted pair transmitter and receiver for component video (YUV) or computer graphics video and unbalanced stereo audio or S/PDIF audio signals. The TP-45 transmitter converts an audio and video to a twisted pair signal and the TP-46 converts the twisted pair signal back into an audio and video signals.

Paired Receivers: TP-46

• Resolution - Up to UGXA (15-Pin HD) and 1080p (Component).
• HDTV Compatible.
• Level (Gain) & EQ (Peaking) Controls (TP-46).
• Sync Polarity Settings (TP-46) - H & V switches for improved HDTV compatibility with the CAT5 outputs.
• Power Connect™ System - Only one unit in a system, either the transmitter or the receiver needs to be connected to a power source.
• Link LED (TP-46) – Indicated the receiver is receiving a signal.
• System Range - Up to 100 meters (330’).
• Cable - UTP (unshielded twisted pair) such as CAT5.
• Compact Size - Part of the Kramer TOOLS™ family of compact, high quality and cost effective solutions.

For more information, please click here.

Back to Top

TP-45RC

* New Product - August 09 *

Computer Graphics/Component Video & Audio Twisted Pair Transmitter

The TP-45RC is a twisted pair transmitter for component video (YUV) or computer graphics video and unbalanced stereo audio or S/PDIF audio signals. The TP-45RC transmitter converts audio and video to a twisted pair signal for transmission to the TP-46 receiver.

• HDTV Compatible
• Max Resolution - UXGA & 1080P
• Inputs - 15-pin HD (computer graphics video), 3 RCA (component video) 3.5mm (unbalanced stereo audio) and 1 RCA (S/PDIF)
• Control - Audio and video input selection switches and contact closure. Remote control terminal block
• Sync Polarity Settings - H & V switches for improved display compatibility with the CAT5 outputs
• System Range - Up to 100m (320ft). Greater distances possible depending on resolution and cable
• Cable - UTP (unshielded twisted pair) or STP (shielded twisted pair) such as CAT5
• Power Connect™ System - Only one unit in a system, the transmitter or the receiver needs to be connected to a power source when the devices are within 50m (150ft) of each other
• Compact Kramer TOOLS™ - 3 units can be rack mounted side-by-side in a 1U rack space with the optional RK-3T rack adapter

For more information, please click here.

Back to Top

TP-42

Component - S/PDIF Line Transmitter - TOOLS

The TP-41 and TP-42 are a twisted pair transmitter and receiver for component video (YUV) and S/PDIF audio signals. The TP-41 transmitter converts component video (YUV) and S/PDIF audio signals into a twisted pair signal and the TP-42 converts the twisted pair signal back into a component video (YUV) and S/PDIF audio signals.

Paired transmitters: TP-41, TP-43

• Bandwidth - 30MHz (- 3dB).
• Twisted Pair Connectors - RJ-45 connector.
• Level (Gain) and EQ (Peaking) Controls (TP-41/TP-42).
• System Range - Up to 100 meters (> 300’).
• Cable - UTP (unshielded twisted pair) such as CAT5.
• Compact Size - Part of the Kramer TOOLS™ family of compact, high quality and cost effective solutions.

For more information, please click here.

Back to Top

TP-46

Component or Computer Graphics Video with Audio over Twisted Pair Transmitter & Receiver - TOOLS

The TP-45 and TP-46 are a twisted pair transmitter and receiver for component video (YUV) or computer graphics video and unbalanced stereo audio or S/PDIF audio signals. The TP-45 transmitter converts an audio and video to a twisted pair signal and the TP-46 converts the twisted pair signal back into an audio and video signals.

Paired transmitters: TP-45

• Resolution - Up to UGXA (15-Pin HD) and 1080p (Component).
• HDTV Compatible.
• Level (Gain) & EQ (Peaking) Controls (TP-46).
• Sync Polarity Settings (TP-46) - H & V switches for improved HDTV compatibility with the CAT5 outputs.
• Power Connect™ System - Only one unit in a system, either the transmitter or the receiver needs to be connected to a power source.
• Link LED (TP-46) – Indicated the receiver is receiving a signal.
• System Range - Up to 100 meters (330’).
• Cable - UTP (unshielded twisted pair) such as CAT5.
• Compact Size - Part of the Kramer TOOLS™ family of compact, high quality and cost effective solutions

For more information, please click here.

Back to Top

TP-121

Computer Graphics & Stereo Audio over Twisted Pair Transmitter - TOOLS

The TP-121 and TP-122 are a twisted pair transmitter and receiver for computer graphics video, stereo and S/PDIF audio signals. The TP-121 transmitter converts computer graphics video and unbalanced stereo audio inputs into a twisted pair signal and the TP-122 converts the twisted pair signal back into a computer graphics video, unbalanced stereo and S/PDIF audio outputs.

Paired Receivers: TP-122

• Resolution - up to UXGA
• Twisted Pair Connectors - RJ-45 connectors.
• HDTV Compatible.
• Level (Gain) and EQ (Peaking) Controls (TP-122).
• System Range - Up to 100 meters (320’).
• Cable - UTP (unshielded twisted pair) such as CAT5.
• Power Connect System - Can send 12V DC on the CAT5 cable to power the receiver or can receive 12V DC from the receiver on the CAT5 cable. All system units must have Power Connect to use this feature.
• Compact Size - Part of the Kramer TOOLS™ family of compact, high quality and cost effective solutions.

For more information, please click here.

Back to Top

TP-45

Component or Computer Graphics Video with Audio over Twisted Pair Transmitter & Receiver - TOOLS

The TP-45 and TP-46 are a twisted pair transmitter and receiver for component video (YUV) or computer graphics video and unbalanced stereo audio or S/PDIF audio signals. The TP-45 transmitter converts an audio and video to a twisted pair signal and the TP-46 converts the twisted pair signal back into an audio and video signals.

Paired Receivers: TP-46

• Resolution - Up to UGXA (15-Pin HD) and 1080p (Component).
• HDTV Compatible.
• Level (Gain) & EQ (Peaking) Controls (TP-46).
• Sync Polarity Settings (TP-46) - H & V switches for improved HDTV compatibility with the CAT5 outputs.
• Power Connect™ System - Only one unit in a system, either the transmitter or the receiver needs to be connected to a power source.
• Link LED (TP-46) – Indicated the receiver is receiving a signal.
• System Range - Up to 100 meters (330’).
• Cable - UTP (unshielded twisted pair) such as CAT5.
• Compact Size - Part of the Kramer TOOLS™ family of compact, high quality and cost effective solutions.

For more information, please click here.

Back to Top

TP-122

Computer Graphics & Stereo Audio over Twisted Pair Receiver - TOOLS

The TP-121 and TP-122 are a twisted pair transmitter and receiver for computer graphics video, stereo and S/PDIF audio signals. The TP-121 transmitter converts computer graphics video and unbalanced stereo audio inputs into a twisted pair signal and the TP-122 converts the twisted pair signal back into a computer graphics video, unbalanced stereo and S/PDIF audio outputs.

Paired transmitters: TP-121

• Resolution - up to UXGA.
• Twisted Pair Connectors - RJ-45 connectors.
• HDTV Compatible.
• Level (Gain) and EQ (Peaking) Controls (TP-122).
• System Range - Up to 100 meters (320’).
• Cable - UTP (unshielded twisted pair) such as CAT5.
• Power Connect System - Can send 12V DC on the CAT5 cable to power the receiver or can receive 12V DC from the receiver on the CAT5 cable. All system units must have Power Connect to use this feature.
• Compact Size - Part of the Kramer TOOLS™ family of compact, high quality and cost effective solutions.

For more information, please click here.

Back to Top

TP-46

Component or Computer Graphics Video with Audio over Twisted Pair Transmitter & Receiver - TOOLS

The TP-45 and TP-46 are a twisted pair transmitter and receiver for component video (YUV) or computer graphics video and unbalanced stereo audio or S/PDIF audio signals. The TP-45 transmitter converts an audio and video to a twisted pair signal and the TP-46 converts the twisted pair signal back into an audio and video signals.

Paired transmitters: TP-45

• Resolution - Up to UGXA (15-Pin HD) and 1080p (Component).
• HDTV Compatible.
• Level (Gain) & EQ (Peaking) Controls (TP-46).
• Sync Polarity Settings (TP-46) - H & V switches for improved HDTV compatibility with the CAT5 outputs.
• Power Connect™ System - Only one unit in a system, either the transmitter or the receiver needs to be connected to a power source.
• Link LED (TP-46) – Indicated the receiver is receiving a signal.
• System Range - Up to 100 meters (330’).
• Cable - UTP (unshielded twisted pair) such as CAT5.
• Compact Size - Part of the Kramer TOOLS™ family of compact, high quality and cost effective solutions.

For more information, please click here.

Back to Top

TP-123

Computer Graphics Video, Audio & Data Twisted Pair Transmitter & Receiver - TOOLS

The TP-123 and TP-124 are a twisted pair transmitter and receiver for computer graphics video, unbalanced stereo audio and RS-232 data signals. The TP-123 will convert computer graphics, audio, and RS-232 inputs to a twisted pair signal, and the TP-124 will convert the twisted pair signal back into computer graphics, audio and RS-232 data signals.

Paired Receivers: TP-124

• Resolution - up to UXGA.
• HDTV Compatible.
• Twisted Pair Connectors - RJ-45 connectors.
• Audio Outputs – unbalanced Stereo and S/PDIF (24-bit 48KHz) simultaneously (TP-124).
• Level (Gain) and EQ (Peaking) Controls (TP-124).
• System Range - Up to 100 meters (300’). Greater distances possible depending on resolution and cable.
• Cable – UTP (unshielded twisted pair) such as CAT5.
• Power Connect™ System – Only one unit in a system, the transmitter or receiver, needs to be connected to a power source. All the system units must have Power Connect to use this feature.
• RS-232 Connect™ System - The unit can send RS-232 commands on the Twisted Pair cable on top of the video signal. All the system units must have RS-232 Connect to use this feature.
• Compact Size - Part of the Kramer TOOLS™ family of compact, high quality and cost effective solutions.

For more information, please click here.

Back to Top

TP-124

Computer Graphics Video, Audio & Data Twisted Pair Transmitter & Receiver - TOOLS

The TP-123 and TP-124 are a twisted pair transmitter and receiver for computer graphics video, unbalanced stereo audio and RS-232 data signals. The TP-123 will convert computer graphics, audio, and RS-232 inputs to a twisted pair signal, and the TP-124 will convert the twisted pair signal back into computer graphics, audio and RS-232 data signals.

Paired transmitters: TP-123

• Resolution - up to UXGA.
• HDTV Compatible.
• Twisted Pair Connectors - RJ-45 connectors.
• Audio Outputs – unbalanced Stereo and S/PDIF (24-bit 48KHz) simultaneously (TP-124).
• Level (Gain) and EQ (Peaking) Controls (TP-124).
• System Range - Up to 100 meters (300’). Greater distances possible depending on resolution and cable.
• Cable – UTP (unshielded twisted pair) such as CAT5.
• Power Connect™ System – Only one unit in a system, the transmitter or receiver, needs to be connected to a power source. All the system units must have Power Connect to use this feature.
• RS-232 Connect™ System - The unit can send RS-232 commands on the Twisted Pair cable on top of the video signal. All the system units must have RS-232 Connect to use this feature.
• Compact Size - Part of the Kramer TOOLS™ family of compact, high quality and cost effective solutions.

For more information, please click here.

Back to Top

TP-102HD

Computer Graphics Video & HDTV over Twisted Pair Transmitter - TOOLS

The TP-102HD is a twisted pair transmitter for computer graphics video and HDTV signals. It converts a computer graphics video or HDTV signal on a 15-Pin HD connector to two identical twisted pair signals.

• Resolution up to UXGA and 1080P (HDTV).
• HDTV Compatible.
• Power Connect System™ - Only one unit in a system, either the transmitter or the receiver needs to be connected to a power source. All the system units must have the Power Connect system to use this feature.
• Long System Range - Up to 100 meters (300’). Greater distances possible depending on signal resolution and cable.
• Cable Type - Uses UTP (unshielded twisted pair) cable such as CAT5.
• Horizontal and Vertical Sync Polarity Selection.
• Compact Size - Part of the Kramer TOOLS family of compact, high quality and cost effective solutions.

For more information, please click here.

Back to Top

VP-300T

1:2 Computer Graphics Video Distribution Amplifier with Twisted Pair Transmitter - TOOLS

The VP-300T is a high performance distribution amplifier for computer graphics video signals with resolutions ranging from VGA through UXGA and higher. It takes one input, provides correct buffering and isolation, and distributes the signal to two computer graphics video outputs and one twisted pair output.

Paired Receivers: PT-120, TP-105, TP-120, VP-5R

• High Bandwidth - 439MHz (- 3dB).
• HDTV Compatible.
• Twisted Pair Connectors - RJ-45 connectors.
• ID Bit Control.
• Twisted Pair Output - Requires a computer graphics video Twisted Pair receiver to convert the Twisted Pair signal back into a computer graphics video signal.
• System Range (CAT5) - Up to 100 meters (320’).
• Cable (Twisted Pair) - UTP (unshielded twisted pair) such as CAT5.
• Compact Size - Part of the Kramer TOOLS™ family of compact, high quality and cost effective solutions.

For more information, please click here.

Back to Top

VP-5T

1:4 Computer Graphics Video Distribution Amplifier with Twisted Pair Transmitter - Desktop

The VP-5T is a high performance distribution amplifier for computer graphics video signals. It takes one input, provides correct buffering and isolation, and distributes the signal to 4 identical outputs 15-pin HD plus one twisted pair output.

Paired Receivers: PT-120, TP-105, TP-120, VP-5R

• High Bandwidth - 445MHz (- 3dB).
• HDTV Compatible.
• Twisted Pair Connector - RJ-45 connectors.
• Level (Gain) and EQ (Peaking) Controls.
• System Range (CAT5) - Up to 100 meters (300’).
• Cable (Twisted Pair) - UTP (unshielded twisted pair) such as CAT5.
• Desktop Size - Compact size, 1U. Two units can be rack mounted side-by-side in a 1U rack space with the optional RK-80 adapter.

For more information, please click here.

Back to Top

TP-100

VGA/XGA Twisted Pair Branching Transmitter - Desktop

The TP-100 and TP-200 are a branching twisted pair transmitter and receiver for computer graphics video signals. The TP-100 transmitter will convert a computer graphics video signal into 2 twisted pair output signals and each TP-200 receiver will convert a twisted pair signal back into three identical computer graphics video signals.

Paired Receivers: TP-200

• Resolution: Up to UXGA
• HDTV Compatible.
• Twisted Pair Inputs/Outputs - RJ-45.
• Branching Outputs - 2 Twisted Pair (TP-100) and 3 Computer Graphics (TP-200).
• Looping Input (TP-100).
• Selectable Input Signal Termination (TP-100).
• ID Bit Control (TP-100).
• EQ (Peaking) Controls (TP-100/TP-200).
• System Range - Up to 100 meters (320’).
• Cable - UTP (unshielded twisted pair) such as CAT5.
• H/V Stabilizing Circuitry.

Desktop Size - Compact size. Two units can be rack mounted side-by-side in a 1U rack space with the optional RK-80 adapter.

For more information, please click here.

Back to Top

TP-210

1:10 Computer Graphics Video over Twisted Pair Transmitter with Dual 15-poin HD Outputs - 19inch

The TP-210 is a high performance distribution amplifier for computer graphics video signals with resolutions ranging from VGA through UXGA and higher. It takes one input and provides 10 twisted pair outputs plus 2 computer graphics video outputs on 15-pin HD connectors for local monitoring.

Paired Receivers: PT-120, TP-105, TP-120, VP-5R

• Resolution - up to UXGA
• HDTV Compatible
• Twisted Pair Connector - RJ-45 (CAT5)
• Twisted Pair Outputs - Requires a computer graphics video (CAT5) receiver to convert the (CAT5) signal back into a computer graphics video signal.
• Sync Polarity Settings - H & V switches for improved HDTV compatibility with the CAT5 outputs.
• System Range (Twisted Pair) - Up to 100 meters (300’)
• Cable (Twisted Pair) - UTP or STP (unshielded/shielded twisted pair) cable such as CAT5
• Power Connect™ System - Only the transmitter needs to be connected to a power source.
  Standard 19” Rack Mount Size - 1RU.

For more information, please click here.

Back to Top

PT-120

Computer Graphics Video over Twisted Pair Receiver PicoTOOLS

The PT-120 is a twisted pair receiver for computer graphics video signals. It will convert a twisted pair signal from a PT-110 transmitter (or other compatible Kramer transmitter) to a computer graphics signal.

Paired transmitters: PT-110, TP-104, TP-105, TP-112HD, VP-12N, VP-12NHD, VP-200XLT, VP-23N, VP-23RC, VP-300T, VP-5T, VP-6A, TP-114, TP-210

• Bandwidth - 150MHz (-3dB)
• Power Connect™ System - Only one unit in a system, the transmitter or receiver, needs to be connected to a power source. All the system units must have the Power Connect system to use this feature.
• HDTV Compatible
• Level (Gain) & EQ (Peaking) Controls
• Horizontal & Vertical Polarity Selection
• Twisted Pair Input Connector - RJ-45.
• System Range - Up to 100 meters (320’). Greater distances possible depending on signal resolution and cable.
• Cable - Uses UTP (unshielded twisted pair) cable such as CAT5.
• Ultra-compact - Part of the Kramer PicoTOOLS™ family of extremely compact, high quality and cost effective solutions.

For more information, please click here.

Back to Top

VP-200XLT

1:1 Computer Graphics Video Line Amplifier with Twisted Pair Transmitter - TOOLS

The VP-200XLT is a high performance line and distribution amplifier for computer graphics video signals with resolutions ranging from VGA through UXGA and higher. It takes one computer graphics input and provides 1 line-amplified output on a 15-pin HD connector and one twisted pair output on a RJ-45 connector.

Paired Receivers: PT-120, TP-105, TP-120, VP-5R

• High Bandwidth - 407MHz (- 3dB).
• HDTV Compatible.
• Twisted Pair Connector - RJ-45.
• Level (Gain) and EQ (Peaking) Controls.
• Twisted Pair Output - Requires a computer graphics video Twisted Pair receiver to convert the Twisted Pair signal back into a computer graphics video signal.
• System Range (Twisted Pair) - Up to 100 meters (320’).
• Cable (Twisted Pair) - UTP (unshielded twisted pair) such as CAT5.

Compact Size - Part of the Kramer TOOLS™ family of compact, high quality and cost effective solutions.

For more information, please click here.

Back to Top

TP-114

1:4 Computer Graphics Video /HDTV over Twisted Pair Transmitter - TOOLS

The TP-114 is a high performance distribution amplifier for computer graphics video or HDTV signals.

Paired Receivers: PT-120, TP-105, TP-120, VP-5R

• Resolution - Up to UXGA.
• Looping Input.
• HDTV Compatible.
• Sync Polarity Settings - H & V switches for improved HDTV compatibility.
• Power Connect™ System - Only the transmitter or receiver needs to be connected to a power source.
• Long System Range - Up to 100 meters (330’). Greater distances possible depending on signal resolution and cable.
• Cable Type - Uses UTP or STP (unshielded/shielded twisted pair) cable such as CAT5.

Compact Size - Part of the Kramer TOOLS™ family of compact, high quality and cost effective solutions.

For more information, please click here.

Back to Top

VP-5R

1:5 Computer Graphics Video Twisted Pair Receiver & Distribution Amplifier - TOOLS

The VP-5R is a high performance distribution amplifier for computer graphics video signals on twisted pair cable. It takes one twisted pair input and distributes the signal to 5 identical computer graphics video outputs on HD-15 connectors.

Paired transmitters: PT-110, TP-104, TP-105, TP-112HD, VP-12N, VP-12NHD, VP-200XLT, VP-23N, VP-23RC, VP-300T, VP-5T, VP-6A, TP-114, TP-210

• Resolution - Up to UXGA.
• HDTV Compatible.
• Twisted Pair Connectors - RJ-45 connectors.
• Level (Gain) and EQ (Peaking) Controls.
• System Range (CAT5) - Up to 100 meters (320’).
• Cable (Twisted Pair) - UTP (unshielded twisted pair) such as CAT5.
• Desktop Size - Compact size, 1U. Two units can be rack mounted side-by-side in a 1U rack space with the optional RK - 80 adapter.

For more information, please click here

Back to Top

TP-200

VGA/XGA Twisted Pair Branching Receiver - Desktop

The TP-100 and TP-200 are a branching twisted pair transmitter and receiver for computer graphics video signals. The TP-100 transmitter will convert a computer graphics video signal into 2 twisted pair output signals and each TP-200 receiver will convert a twisted pair signal back into three identical computer graphics video signals.

Paired transmitters: TP-100

• Resolution: Up to UXGA
• HDTV Compatible.
• Twisted Pair Inputs/Outputs - RJ-45.
• Branching Outputs - 2 Twisted Pair (TP-100) and 3 Computer Graphics (TP-200).
• Looping Input (TP-100).
• Selectable Input Signal Termination (TP-100).
• ID Bit Control (TP-100).
• EQ (Peaking) Controls (TP-100/TP-200).
• Cable - UTP (unshielded twisted pair) such as CAT5.
• System Range - Up to 100 meters (320’). Greater distances possible depending on resolution and cable.
• H/V Stabilizing Circuitry.

Desktop Size - Compact size. Two units can be rack mounted side-by-side in a 1U rack space with the optional RK-80 adapter.

For more information, please click here.

Back to Top

PT-110

XGA Line Transmitter - PicoTOOLS

The PT110 is a twisted pair transmitter for computer graphics video signals. It converts a computer graphics signal into a twisted pair signal which will be converted back to a computer graphics video signal when used in conjunction with the Kramer TP-120 twisted pair receiver (or other compatible Kramer receiver).

Paired Receivers: PT-120, TP-105, TP-120, VP-5R

• Resolution: Up to UXGA
• HDTV Compatible.
• Twisted Pair Output - RJ-45.
• System Range - Up to 100 meters (320’). Greater distances possible depending on resolution and cable.
• Cable - UTP (unshielded twisted pair) such as CAT5.
• Power Connect™ System - Only one unit in a system, the transmitter or receiver, needs to be connected to a power source. All the system units must have Power Connect to use this feature.
• Ultra-compact - Part of the Kramer PicoTOOLS™ family of extremely compact, high quality and cost effective solutions.

For more information, please click here.

Back to Top

TP-120

XGA Line Receiver - TOOLS

The TP-120 is a twisted pair receiver for computer graphics video signals. When used in conjunction with the Kramer PT-110 twisted pair transmitter (or other compatible Kramer transmitter), it converts a twisted pair signal back into a computer graphics video signal.

Paired transmitters: PT-110, TP-104, TP-105, TP-112HD, VP-12N, VP-12NHD, VP-200XLT, VP-23N, VP-23RC, VP-300T, VP-5T, VP-6A, TP-114, TP-210

• depending on resolution and cable.
• Cable - UTP (unshielded twisted pair) such as CAT5.
• Power Connect™ System - Only one unit in a system - the transmitter or receiver - needs to be connected to a power source. All the system units must have Power Connect to use this feature.
• Compact Size - Part of the Kramer TOOLS™ family of compact, high quality and cost effective solutions.
• Resolution: Up to UXGA
• HDTV Compatible.
• Twisted Pair Input - RJ-45.
• Level (Gain) and EQ (Peaking) Controls.
• System Range - Up to 100 meters (320’). Greater distances possible

For more information, please click here.

Back to Top

TP-300FW

FireWire Range Extender - TOOLS

The TP-300FW is a twisted pair transmitter or receiver for FireWire (IEEE 1394) signals. When used in pairs, one will convert a FireWire signal into a twisted pair signal and the other will convert the twisted pair back to a FireWire signal and simultaneously output the twisted pair signal to another TP-300FW.

• Twisted Pair Ports - RJ-45.
• System Range - Up to 100 meters (320’) and up to 200 meters (640’) using a 3rd TP-300FW.
• Cable - Shielded only
• EDS Protection - Incorporates Kramer’s Spark-Guard™ signal protection circuitry to help protect against EDS (electrostatic discharge) which can damage digital equipment.

Compact Size - Part of the Kramer TOOLS™ family of compact, high quality and cost effective solutions.

For more information, please click here.

Back to Top

TP-400FW

FireWire Range Extender - 19inch

The TP-400FW is a twisted pair transmitter or receiver for FireWire (IEEE 1394) signals. When used in pairs, one will convert a FireWire signal into a twisted pair signal and the other will convert the twisted pair back to a FireWire signal and simultaneously output the twisted pair signal to another TP-400FW.

• Twisted Pair Ports - RJ-45.
• FireWire Ports - 1 Front or 1 Rear.
• System Range - Up to 100 meters (320’) using a pair of TP-400FWs and up to 500 meters (1600’) using a 6 TP-400FWs.
• Cable - Shielded only
• EDS Protection - Incorporates Kramer’s Spark-Guard™ signal protection circuitry to help protect against EDS (electrostatic discharge) which can damage digital equipment.
• Power Connect™ System - Only one unit in a system - the transmitter or receiver - needs to be connected to a power source. All the system units must have Power Connect to use this feature.

Desktop Size - Compact size. Two units can be rack mounted side-by-side in a 1U rack space with the optional RK-80 adapter.

For more information, please click here.

Back to Top

WP-120

Active Wall Plate - 15-pin HD Receiver

The WP-120 is a twisted pair receiver for computer graphics video signals with resolutions up to UXGA. When used in conjunction with the Kramer PT-110 twisted pair transmitter (or other compatible Kramer transmitter), it converts a twisted pair signal back into a computer graphics video signal.

• Resolution - Up to UXGA.
• HDTV Compatible.
• Twisted Pair Input - RJ-45 connector.
• Level (Gain) and EQ (Peaking) Controls.
• Sync Polarity Settings - H & V switches for improved monitor compatibility with the CAT5 outputs.
• System Range - Up to 100 meters (320’). Greater distances possible depending on resolution and cable.
• Cable - UTP (unshielded twisted pair) such as CAT5.
• Power Connect™ System - Only one unit in a system, the transmitter or the receiver needs to be connected to a power source
• Wall Plate - 1 gang.

For more information, please click here.

Back to Top

PT-1CAT5

Spark-Guard Pro™ Network Line Protector

The PT-1CAT5 is a line protector for network signals. The unit is used in Plug and Play applications to prevent permanent damage to sensitive equipment as a result of ESD (Electrostatic discharge), lightning or transient voltage surges.

• Inputs – 1 CAT5
• Outputs – 1 CAT5
• PicoTOOLS

For more information, please click here.

Back to Top

TP-104

XGA Line Transmitter / 1:4 DA-TOOLS

The TP-104 is a twisted pair transmitter for computer graphics signals. It converts a computer graphics video signal into 4 twisted pair signals.

Paired Receivers: PT-120, TP-105, TP-120, VP-5R

• Resolution - Up to UXGA
• Twisted Pair Input/Output - RJ-45 Connectors.
• System Range - Up to 100 meters (320’).
• Cable - UTP (unshielded twisted pair) such as CAT5.
• Compact Size - Part of the Kramer TOOLS™ family of compact, high quality and cost effective solutions.
  HDTV Compatible.

For more information, please click here.

Back to Top

TP-112HD

1:2 Computer Graphics Video & HDTV over Twisted Pair Transmitter -TOOLS

The TP-112HD is a twisted pair transmitter for computer graphics video and HDTV signals. It converts a computer graphics video or HDTV signal on a 15-Pin HD connector to two identical twisted pair signals.

Paired Receivers: PT-120, TP-105, TP-120, VP-5R

• High Bandwidth -150MHz (-3db).
• HDTV Compatible
• Power Connect System - Only one unit in a system, either the transmitter or the receiver needs to be connected to a power source. All the system units must have the Power Connect system to use this feature.
• Long System Range - Up to 100 meters (300). Greater distances possible depending on signal resolution and cable.
• Cable Type - Uses UTP (unshielded twisted pair) cable such as CAT5.
• Horizontal and Vertical Sync Polarity Selection
• Compact Size - Part of the Kramer TOOLS family of compact, high quality and cost effective solutions

For more information, please click here.

Back to Top

TP-105

CAT5 Line Driver/DA -TOOLS

The TP-105 is a line driver and distribution amplifier for twisted pair signals. It takes a twisted pair input and distributes it to 2 identical twisted pair outputs.

Paired Receivers: PT-120, TP-105, TP-120, VP-5R

• Bandwidth - Up to UXGA.
• HDTV Compatible.
• Twisted Pair Output - RJ-45 connectors.
• Level (Gain) and EQ (Peaking) Controls.
• System Range - Up to 100 meters (300’).
• Compact Size - Part of the Kramer TOOLS™ family of compact, high quality and cost effective solutions.

For more information, please click here.

Back to Top

COBRA-R500-2

Multi-Format Video & RS-232 Twisted Pair Receiver

The Cobra R500-2 is a twisted pair receiver for multi-format video and RS-232 signals. The unit converts a twisted pair signal back into its original video format (composite video, s-Video, component video and computer graphics video) and RS-232.

• Inputs – 1 CAT5
• Outputs - 1 15-pin HD – CV, Y/C, YUV, VGA
• Kramer TOOLS Size

For more information, please click here.

Back to Top

COBRA-T2

Multi-Format Video & RS-232 Twisted Pair Receiver

The Cobra T2 is a twisted pair transmitter for multi-format video and RS-232 signals. The unit converts composite video, s-Video, component video or computer graphics video and RS-232 to a twisted pair signal.

• Inputs – 1 15-pin HD, CV, Y/C, YUV, VGA
• Outputs - 1 CAT5
• Kramer TOOLS Size

For more information, please click here.

Back to Top

COBRA-TA

Multi-Format Video & Mono Audio Twisted Pair Transmitter

The Cobra TA is a twisted pair transmitter for multi-format video and stereo audio signals. The unit converts composite video, s-Video, component video or computer graphics video, combines (sums) the stereo into mono audio and converts both signals into a twisted pair signal.

• Inputs – 1 15-pin HD, CV, Y/C, YUV, VGA
• Outputs - 1 CAT5
• Kramer TOOLS Size

For more information, please click here.

Back to Top

COBRA-TWA

Multi-Format Video & Summed Audio Twisted Pair Transmitter & Wall Plate

The Cobra TWA is a twisted pair transmitter for multi-format video and stereo audio signals. The unit converts composite video, s-Video, component video or computer graphics video, combines (sums) the stereo into mono audio and converts both signals into a twisted pair signal.

• Inputs – 1 15-pin HD, CV, Y/C, YUV, VGA
• Outputs - 1 CAT5
• Wallplate

For more information, please click here.

Back to Top

COBRA-R500A

Multi-Format Video & Mono Audio Twisted Pair Receiver

The Cobra R500A is a twisted pair receiver for multi-format video and mono audio signals. The unit converts a twisted pair signal back into its original video format (composite video, s-Video, component video and computer graphics video) and 2 channels of mono (summed stereo) audio.

• Inputs – 1 CAT5
• Outputs - 1 15-pin HD, CV, Y/C, YUV, VGA
• Kramer TOOLS size

For more information, please click here.

Back to Top

COBRA-R1300-A

Multi-Format Video, Stereo Audio & RS-232 Twisted Pair Transmitter

The Cobra R1300A is a twisted pair receiver for multi-format video and mono audio signals. The unit converts a twisted pair signal back into its original video format (composite video, s-Video, component video and computer graphics video) and 2 channels of mono (summed stereo) audio.

• Inputs: 1 CAT5
• Outputs: 1 Universal
  - CV
  - Y/C
  - YUV/HD
  - VGA
• Kramer Tools size

For more information, please click here.

Back to Top

COBRA-SKEW

Skew Adjustment Board for Cobra 1300 Series Receivers

The Cobra SKEW is a daughter-board that installs inside a Cobra R1300series long range receivers. It corrects skew (delay) errors in long twisted pair cable runs which are seen as mis-convergence on the display.

For more information, please click here.

Back to Top

COBRA-R1300-S2

Multi-format Video, Stereo Audio & RS-232 Twisted Pair Receiver

The Cobra R1300S2 is a twisted pair receiver for multi-format video, stereo audio and RS-232 signals. The unit converts a twisted pair signal back into its original video format (composite video, s-Video, component video and computer graphics video), stereo or S/PDIF audio and RS-232.

• Inputs – 1 CAT5
• Outputs - 1 15-pin HD – CV, Y/C, YUV, VGA
• Kramer TOOLS Size

For more information, please click here.

Back to Top

COBRA-TS2

Multi-Format Video, Stereo Audio & RS-232 Twisted Pair Transmitter

The Cobra TS2 is a twisted pair transmitter for multi-format video, stereo or S/PDIF audio and RS-232 signals. The unit converts composite video, s-Video, component video or computer graphics video, stereo or S/PDIF audio and RS-232 to a twisted pair signal.

• Inputs – 1 15-pin HD – CV, Y/C, YUV, VGA
• Outputs - 1 CAT5
• Kramer TOOLS Size

For more information, please click here.

Back to Top

COBRA-SKEW

Skew Adjustment Board for Cobra 1300 Series Receivers

The Cobra SKEW is a daughter-board that installs inside a Cobra R1300series long range receivers. It corrects skew (delay) errors in long twisted pair cable runs which are seen as mis-convergence on the display.

For more information, please click here.

Back to Top

COBRA-DA9

1:9 Twisted Pair Distribution Amplifier

The Cobra DA9 is a distribution amplifier for twisted pair signals. It takes a twisted pair input and distributes it to nine identical twisted pair outputs.

• Inputs – 1 CAT5
• Outputs – 9 CAT5
• Desktop Size

For more information, please click here.

Back to Top

COBRA-RWM

Cobra Mounting Bracket

U-shaped mounting bracket for all Cobra R1300 series receivers.

For more information, please click here.

Back to Top

COBRA-TWM

Cobra Mounting Bracket

U-shaped mounting bracket for all Cobra Transmitters

For more information, please click here.

Back to Top

COBRA-TM4

19" Rack Adapter for 4 Cobra Transmitters

For more information, please click here.

Back to Top

COBRA-TMB

Blank Slot Coverfor Cobra TM-4 Rack Mount

Blank plate to cover an unused slot on the TM-4 rack adapter

For more information, please click here.

Back to Top