CP-GM-XX-5BMKIT

Plenum VGA to 5BNC Breakout Cable Kits

Kramer’s plenum breakout kits contain everything needed to build an attractive and high quality 15-pin HD to 5BNC breakout cable in the field.

• Convenient Bundling - Simplifies ordering and speeds up installation by bundling the right components into a single part number and package.
• Kit Contents - The kit contains a single-ended plenum VGA cable, five 75 ohm crimp style male BNC connectors, color coded heat shrink for strain relief, a larger piece of heat shrink for the breakout point, and clear instructions.
• Easy installation - Pull the single-ended cable into position so that the attractive molded 15-pin HD connector remains in the desired location, then prepare the bare end and install the crimp connectors using industry standard procedures and tools.
• Plenum rating - The single-ended cable in any CP-GM-XX-5BMKIT is CL2P and CMP rated. It is constructed from Kramer BCP-5X cable which contains 5 high resolution mini coaxes.

For more information, please click here.

BCP-XTP

Plenum Rated Lead Free Multi-Purpose Presentation Cable

Kramer’s BCP-XTP is a plenum rated unshielded twisted pair (UTP) type cable designed as the ideal companion to Kramer twisted pair transmitter-receiver sets. BCP-XTP resembles typical CAT5e, but with internal components optimized for transmission of video/audio signals rather than high speed data.

• Quality Construction - Durable and flexible CMP plenum rated bulk cable. Four pairs of solid 24 gauge copper.
• Optimized for high res video/audio signals - Four pairs are twisted at the same ratio so the actual length of each is identical. Note that BCP-XTP is not suited for high speed data or network applications.
• Optimized for Kramer hardware - Use with any of Kramer’s wide range of “twisted pair”
  transmitter-receiver sets such as PT-110/120, WP-110/PT-120, etc. Just terminate
  with RJ-45 connectors, or strip and attach to terminal strips or punch-down blocks as
  needed.
• Long distance precision - Video shift or “skew” is eliminated in long runs because the RGB color signals arrive at the same time.
• Available in 330 and 1000 feet pull boxes (100 and 300 meter).

For more information, please click here.

BC-1T

Balanced Mono Audio or Control Cable

Kramer’s BC-1T is a high quality shielded pair style cable designed for routing balanced mono or unbalanced stereo audio signals in commercial or residential A/V systems. Also ideal for any application where a low capacitance 20 gauge shielded pair is appropriate.

• Quality Construction - Conductors and drain wire are stranded 20 gauge tinned copper. Conductor jackets are color-coded red and black. Shield is aluminum/mylar foil. Rugged and flexible jacket with internal rip cord and sequential markings every meter. Exceptionally easy to strip because the foil shield is bonded to the inside of the jacket.
• Length - Available in 300 meter reels (990ft.).

For more information, please click here.

BC-1X59

RG-59 High Resolution Cable

Kramer’s BC-1X59 is a high resolution RG-59 style coaxial cable perfect for long distance runs which require precision performance with analog or digital video signals.

• Quality Construction - 20 gauge solid center conductor and dual shield design consisting of copper braid and foil. Rugged and flexible with low attenuation.
• Universal Compatibility - Compatible with Kramer’s compression connectors as well as typical crimp systems.
• Length - Available in 328 foot rolls (100 meters).

For more information, please click here.

BC-2T

Balanced Stereo Audio or Control Cable

Kramer’s BC-2T is a high quality dual shielded pair style cable designed for routing balanced stereo audio signals in commercial or residential A/V systems. Also ideal for some control systems, or any application where two low capacitance 20 gauge shielded pairs contained in one jacket are appropriate.

• Quality Construction - Conductors and drain wire are stranded 20 gauge tinned copper, conductor jackets are color-coded red/ black and green/white, and the shield is aluminum/mylar foil. Rugged and flexible jacket with sequential markings every meter. Exceptionally easy to strip because the foil shield is bonded to the inside of the jacket.
• Length - Available in 300 meter reels (990ft.).

For more information, please click here.

BC-3X

3 Mini Coax High Resolution Video Cable

Kramer’s BC-3X is a high resolution 75 ohm 3-mini coaxial cable perfect for routing component video or composite video & stereo audio signals in commercial or residential A/V systems. It is fully compatible with all analog and digital component video formats including YUV, Y R-Y B-Y, Y Pb Pr, and Y Cr Cb.

• Quality Construction - Each coax has a 28 gauge solid center conductor and dual shield design consisting of copper braid and Mylar/foil. Coax jackets are color-coded red, green, blue. Rugged and flexible. Low attenuation.
• Universal Compatibility - Compatible with Kramer’s compression connectors as well as typical crimp systems.
• Length - Available in 100 and 300 meter reels (330 and 990ft.).

For more information, please click here.

BC-4X

4 Mini Coax High Resolution Video Cable

Kramer’s BC-4X is a high resolution 75 ohm 4-mini coaxial cable perfect for routing component video and digital audio signals in commercial or residential A/V systems. It is fully compatible with all analog and digital component video formats including YUV, Y R-Y B-Y, Y Pb Pr and Y Cb Cr as well as all digital audio standards which use a single 75 ohm coax including S/PDIF.

• Quality Construction - Each coax has a 28 gauge solid center conductor and dual shield design consisting of copper braid and mylar/foil. Coax jackets are color-coded red, green, blue, black. Rugged and flexible. Low attenuation.
• Universal Compatibility - Compatible with Kramer’s compression connectors as well as typical crimp systems.
• Length - Available in 100 and 300 meter reels (330 and 990ft.).

For more information, please click here.

BC-5X26

5 Mini Coax High Resolution Enhanced Video Cable

Kramer’s BC-5X26 is a high resolution 26AWG 75 ohm 5-mini coaxial cable designed for routing high resolution RGBHV signals in professional A/V systems.

• Quality Construction - Each coax has a 26 gauge solid center conductor and dual shield design consisting of copper braid and mylar/foil. Coax jackets are color-coded red, green, blue, yellow, black. Rugged and flexible jacket with internal rip cord and sequential markings every meter.
• High Resolution - Supports higher resolution and longer distances than 28 gauge versions.
• Universal Compatibility - Compatible with Kramer’s compression connectors as well as typical crimp systems.
• Length - Available in 100 meter reels (330ft.).

For more information, please click here.

BC-1X

RG-6 High Resolution Cable

Kramer’s BC-1X is a super high resolution RG-6 style coaxial cable perfect for long distance runs which require precision performance with analog or digital video signals.

• Quality Construction - 18 gauge solid center conductor and dual shield design consisting of aluminum braid and foil. Rugged and flexible with low attenuation.
• Universal Compatibility - Compatible with Kramer’s compression connectors as well as typical crimp systems.
• Varied Selection of Lengths - Available in 328 and 985 foot rolls (100 and 300 meters).

For more information, please click here.

BC-2S

Speaker Cable

Kramer’s BC-2S is a high quality twisted pair style cable designed for connecting speakers and amplifiers in commercial or residential A/V systems.

• Quality Construction - Conductors are stranded 16 gauge copper, and the conductor jackets are color-coded red/black. Rugged and flexible jacket with sequential markings every meter. Low capacitance due to high strand count, 26/30.
• Length - Available in 300 meter reels (990ft.).

For more information, please click here.

BC-2X

s-Video Cable

Kramer’s BC-2X is a high resolution dual mini coaxial cable perfect for routing s-Video signals, also know as Y/C, in commercial or residential A/V systems.

• Quality Construction - Each coax has a 26 gauge center conductor and dual shield design consisting of copper spiral and mylar/foil. Rugged and flexible. Low attenuation.
• Universal Compatibility - Compatible with Kramer’s compression connectors as well as typical crimp systems.
• Varied Selection of Lengths - Available in 328 or 985 foot rolls (100 or 300 meters).

For more information, please click here.

BC-3X2T7S

14 Conductor Presentation Cable

Kramer’s BC-3X2T7S is a high resolution multi-conductor containing 3 mini coaxes, 2 shielded pairs, and 7 single strands. It is the most common type of cable used for construction of 15-pin HD (VGA/UXGA) cables.

• Quality Construction - Each coax has a 26 gauge solid center conductor and dual shield design consisting of copper braid and mylar/foil. Rugged and flexible jacket with internal rip cord and sequential markings every meter. Coax dielectrics are color-coded red, green, blue.
• High Resolution - Supports higher resolution and longer distances than 28 gauge versions.
• Length - Available in 100 meter reels (330ft.).

For more information, please click here.

BC-5X

15 Mini Coax High Resolution Video Cable

Kramer’s BC-5X is a high resolution 75 ohm 5-mini coaxial cable perfect for routing RGBHV signals in commercial or residential A/V systems.

• Quality Construction - Each coax has a 28 gauge solid center conductor and dual shield design consisting of copper braid and mylar/foil. Coax jackets are color-coded red, green, blue, yellow, black. Rugged and flexible jacket with internal rip cord and sequential markings every meter.
• Universal Compatibility - Compatible with Kramer’s compression connectors as well as typical crimp systems.
• Varied Selection of Lengths - Available in 100 and 300 meter reels (330 and 990ft.).

For more information, please click here.

BC-5X5S

5 Mini Coax + 5 Single Strands High Resolution Video Cable

Kramer’s BC-5X5S is a high resolution 28 AWG 75 ohm 5-mini coaxial cable with 5 additional 28 gauge single strands and an outer shield. Its unique design makes it ideal for building it into 5BNC or 15-pin HD (VGA/UXGA) cables and routing computer graphic video signals in professional A/V systems.

• Quality Construction - Each coax has a 28 gauge solid center conductor and dual shield design consisting of copper braid and mylar/foil. A dual layer outer shield surrounds the other components and consists of a copper braid and mylar/foil. Coax jackets are color-coded red, green, blue, yellow, black. Rugged and flexible jacket with internal rip cord and sequential markings every meter.
• Extra Single Strands - Extra strands allow passing of extra pins for ID bit support in 15-pin HD cables.
• Universal Compatibility - Compatible with Kramer’s compression connectors as well as typical crimp systems.
• Length - Available in 100 meter reels (330ft.).

For more information, please click here.

AV Cable Assemblies

C-2RAM/2RAM

3Dual RCA Stereo Audio Cable

Kramer’s 2RAM series are high quality dual RCA cable assemblies designed for stereo audio signals. They are perfect for audio connection of DVD players, VCR’s, and other consumer style devices which are routinely used in professional AV systems.

For more information, please click here.

C-3RVM/3RVM Series

3RCA to 3 RCA Component Video Cables

Kramer 3RVM series cables are constructed of 3 RG-59 cables in a flat configuration with male RCA connectors at each end. They offer outstanding quality, durability, and high performance for any component video application.

• Quality Construction - Constructed from triple RG-59 cable for perfect transmission of any interlaced or high definition component video signal.
• High Quality Connectors - Rugged gold plated RCA connectors are color coded red, green, and blue to match component video connectors on typical equipment.
• Multiple Applications - This cable is compatible with any standard or high definition analog component video signal including YUV, Y B-Y R-Y, Y Pb Pr and Y Cb Cr. Also great for composite video and stereo audio use.
• Varied Selection of Lengths - Available in 3, 6, 10, 15, 25, 35, 50, 75, and 100 foot lengths (0.9 to 30 meters).

For more information, please click here.

C-GM/3RVM & C-GM/3RVF

15-pin HD to 3 RCA Breakout Cables

Kramer’s computer graphics video to component video breakout cables are constructed of 3 mini coax cables with a 15-pin HD (M) connector on one end and 3 RCA (M or F) connectors on the other. These cables can be used when a source or display can be configured to send or receive either computer graphics video or component video signals - for example, Kramer’s VP-724xl scaler uses this adapter to support its HDTV output modes.

• High Quality Construction - Rugged and high resolution 3 mini coax cable with molded connectors.
• Numerous Applications - Allow Kramer 15-pin HD distribution amplifiers, switchers and scaler switchers to be used to route component video signals.
• Varied Selection of Lengths - Male 15-pin HD to female RCA’s version available in 1 ft length (0.3 meters). Male 15-pin HD to male RCA’s version available in 3 or 6 foot lengths (0.9 or 1.8 meter).

For more information, please click here.

C-R4VM/R4VM Series

4 RCA to 4 RCA Component Video Cables

Kramer’s R4VM series cables are constructed from 4 mini coax cables terminated with RCA connectors at each end. They offer outstanding quality, durability, and high performance for any component video & digital audio application.

• Quality Construction - Constructed using rugged and flexible cable containing four mini coaxes.
• High Quality Connectors - Coaxes are contained in a single round jacket, and are terminated with premium quality gold plated, color coded RCA connectors.
• Multiple Applications - This cable is compatible with any standard or high definition analog component video signal including YUV, Y B-Y R-Y, Y Pb Pr and Y Cb Cr. Also compatible with typical digital audio formats including S/PDIF, Dolby Digital, DTS, Pro logic II, etc.)
• Cable Specs - For detailed cable specs see Kramer BC-4X.
• Varied Selection of Lengths - Available in 3, 6, 10, 15, 25, 35, and 50 foot lengths (0.9 to 15 meters).

For more information, please click here.

C-A35F/2RM

3.5mm Audio to 2 RCA Male Cable

The Kramer C-A35F/2RM is a simple adapter cable which has a 3.5mm female connector at one end and 2 RCA male connectors at the other. It is 1 foot in length and provides passive conversion of an unbalanced line level stereo audio signal.

• Quality Construction - Molded male dual RCAs on one end and molded female 3.5mm on the other.
• High Quality Connectors - RCA connectors are color coded red, white to match audio connectors on typical equipment.

For more information, please click here.

C-R3VM/R3VM Series

3 RCA to 3 RCA High Resolution Mini Coax Component Video Cables

Kramer R3VM series cables are constructed of three 28AWG high resolution mini coax cables in a single jacket with male RCA connectors at each end. They offer outstanding quality, durability, and high performance and are designed for home theater applications

• Quality Construction - Constructed using rugged and flexible 28 AWG cable containing four mini coaxes.
• High Quality Connectors - Coaxes are contained in a single round jacket, and are terminated with premium quality gold plated, color coded RCA connectors.
• Multiple Applications - This cable is compatible with any standard or high definition analog component video signal including YUV, Y B-Y R-Y, Y Pb Pr and Y Cb Cr.
• Cable Specs - For cable details see Kramer BC-3X specs.
• Varied Selection of Lengths - Available in 3, 6, 10, 15, 25, 35, and 50 foot lengths (0.9 to 15 meters).

For more information, please click here.

C-RVM/RVM Series

1 RCA to 1 RCA Cables

Kramer RVM series cables are constructed of RG-59 cable with male RCA connectors at each end. They offer outstanding quality, durability, and high performance for any composite video or mono audio signal.

• Quality Construction - Constructed from RG-59 cable for transparent performance with composite video signals.
• High Quality Connectors - Molded connectors are yellow to match video connectors on typical equipment.
• Varied Selection of Lengths - Available in 3, 6, 10, 15, 25, 35, 50, 75, and 100 foot lengths (0.9 to 30 meters).

For more information, please click here.

C-SM/2BM & C-SM/2BF

s-Video to 2 BNC Breakout Cables

Kramer’s s-Video (Y/C) breakout cable is constructed of dual mini coax cables with a male s-Video (4-pin) connector on one end and 2 BNCs on the other. They are used for converting an s-Video signal from the typical 4 pin format to higher quality dual BNC format preferred for long cable runs.

• Quality Construction - Luminance (Y) and Chrominance (C) signals are passed through a high quality 26 AWG dual coax cable terminated with 4-pin mini DIN and high quality BNC connectors.
• High Quality Connectors - Gold plated S-Video connectors for corrosion resistance and best possible connection, and 75 ohm BNCs for correct impedance matching.
• Flexible Applications - Perfect for integrating consumer products into commercial display systems.
• Varied Selection of Lengths - Available in 1 or 6 foot versions and your choice of male BNC’s (C-SM/2BM-X) or female BNC’s (SM/2BF-X).

For more information please click here.

C-SM/SM Series

s-Video to s-Video Cables

Kramer SM/SM series cables are high performance s-Video (Y/C) cables with molded 4-pin mini DIN connectors at each end. They carry the luminance and color signals on separate cables for superior picture quality than composite signals.

• Quality Construction - Passes Luminance (Y) and Chrominance (C) signals over a high quality 26 AWG dual coax cable terminated with 4-pin mini DIN connectors.
• High Quality Connectors - Gold plated connectors for corrosion resistance and best possible connection.
• Cable Specs - See Kramer BC-2X for detailed cable specs.
• Varied Selection of Lengths - Available in 3, 6, 10, 15, 25, 35, 50, 75, and 100 ft lengths (0.9 to 30 meters).

For more information please click here.

ADC-DF/HM

Adapter Cable, DVI Female to HDMI Male

Kramer’s ADC-DF/HM is a short cable, approx 1 foot in length, designed to adapt a DVI cable to a device with an HDMI input, or to adapt from an HDMI source to a DVI cable.

For more information please click here.

ADC-DM/HF

Adapter Cable, HDMI Female to DVI Male

Kramer’s ADC-DM/HF is a short cable, approx 1 foot in length, designed to adapt an HDMI cable to a device with a DVI input, or to adapt a DVI source to an HDMI cable.

For more information please click here.

C-AFDM/AFDM Series

All Fiber Optical DVI Extension Cable

Kramer’s new all DVI cable system is constructed of high performance fiber optic cable with DVI-D connectors on each end. They are designed to transmit DVI-D signals extremely long distances with pristine digital image quality.

• Fiber Optic Converters Built-in - A Kramer C-AFDM/AFDM has converters built into DVI-D connectors on both ends of the cable. The transmitter (connected to the source) converts DVI into fiber-optic light pulses which can travel much greater distances than traditional copper-based systems, and the receiver converts back to DVI-D for connection to a display or other receiving device.
• Quality Construction - 8 fiber strands: four for DDC/HDCP interconnection and four for red, green, blue and clock transmission.
• Numerous Applications - Integration of digital display systems for medical, military aerospace, factory automation and traffic control platforms. Flat panel display, plasma display panel and projector installation in conference rooms, auditoriums and for kiosk systems.
• LED signboards for large scale information display and stadiums.
• High Resolution - Compatible with all HDTV standards up to 1080p and all VESA resolutions up to WUXGA (1920x1200) at 60Hz refresh rate with 1 pixel/clock mode.
• Zero EMI - Does not emit any cable electromagnetic interference or emission, making it suitable for any medical or other EMI sensitive environment.
• Flexible Power Options - Can use either DC power from the graphic card or AC/ DC power from an external +5V adapter Requires no software installation.
• HDCP Compliant - AFDM cables are also compatible with the HDMI Interface standard and are HDCP compliant.
• Built to Order in Custom Lengths - Kramer AFDM cables are built to order in any length from 50 - 500 meters (165 to 1,650ft) with lead time of approximately 2 weeks.

For more information please click here.

C-FODM/FODM Series

Fiber Optic DVI Extension Cables

Kramer’s new all DVI cable system is constructed of high performance hybrid cable containing fiber optic and copper wires terminated with DVI-D connectors on each end. They are designed to transmit DVI-D signals extremely long distances with pristine digital image quality video with the copper cable carrying additional data required for HDCP compliance.

• Quality Construction - Kramer FODM cables comply with the DVI standard and support the DDC2B mode. They are very flexible and usually do not require external power, making them very “installer friendly”.
• High Resolution - Compatible with all HDTV standards up to 1080p and all VESA resolutions up to WUXGA (1920x1200) at 60Hz refresh rate with 1 pixel/clock mode.
• Flexible Power Options - They draw +5V power on pin 14 from most source devices (some DVI source devices may not supply power on pin 14 and will require an external power adapter model PS-1DVI).
• HDCP Compliant - FODM cables are also compatible with the HDMI interface standard and are HDCP compliant.
• Varied Selection of Lengths - Kramer FODM cables are available in 10, 20, 30, 50 and 100 meters (33 to 330ft).

For more information please click here.

C-DM/DM Series

DVI to DVI Cables

The Kramer DVI/DVI cables are high performance cables with molded DVI-D connectors at both ends. These dual link cables are designed to carry digital-only signals (24+1 pin) used for direct digital connections between a source and display device such as flat panel monitors and video/data projectors.

• Quality Construction - DVI-D connection eliminates the analog conversion process providing maximum clarity and resolution in displayed images.
• Dual Link - Kramer DM/DM series cables support all single-link and dual-link resolutions.
• Fiber Optic Options - Also see Kramer’s DVI-over-fiber products for transmission distances up to 500 meters (1,650 ft).
• HDCP Compliant - DVI cables are also compatible with the HDMI interface standard and are HDCP compliant.
• Varied Selection of Lengths - Available in lengths up to 20 meters (66ft). Note that higher resolutions may not be supported in all lengths.

For more information please click here.

C-HDMI/DVI Series

HDMI to DVI Cables

The Kramer HDMI/DVI series are high performance cables with HDMI connectors at one end and a DVI connector at the other. They are designed to connect between digital video sources and displays and recorders that don’t have both DVI and HDMI connectors.

• Quality Construction - HDMI to DVI single link (18 +1 pin) cable provides excellent conductivity at high frequencies and longevity without degradation.
• High Quality Connectors - The connectors are gold plated for corrosion resistance and best possible connection quality.
• HDCP Compliant - HDMI cables are also compatible with the HDMI interface standard and are HDCP compliant.
• Varied Selection of Lengths - Available in 3, 6, 10, 15, 25, 35 and 50ft lengths (0.9 to 15 meters).

For more information please click here.

ADC-DM/DF+GF

Adapter Cable, DVI-I Male to DVI-D Female and 15-pin HD Female

Kramer’s ADC-DM/DF+GF is a short two-headed cable, approximately 1 foot in length, designed to break out digital DVI and analog VGA signals from a compatible DVI source.

For more information please click here.

CP-GM/GM (MR)

Plenum Rated MR Series VGA (HD-15) Male-Male Cable

Kramer’s MR series plenum rated VGA cables offer cost savings without compromising video performance by featuring molded 15-pin HD connectors and “RGBHV” construction. RGBHV construction refers to the use of Kramer BCP-5X five mini coax as the raw cable. In other words, they function exactly like an RGBHV (5BNC) cable.

• Plenum Rated - The low smoke and fire-resistant properties of plenum rated cable allow it to reside in air return spaces of ceiling, floors, and walls, often saving the cost of installing conduit.
• High Performance - Video performance is identical to our backshell and M style plenum VGA cables.
• RGBHV Style - Construction from 5 coax cable prevents support of ID bits or other advanced communication functions. However, advanced communication support is typically not required in presentation systems because of the common use of signal management devices which often only process the video and sync signals anyway.
• Installation Friendly - The design makes it possible to cut off one end and install 5 BNCs to create breakout cables in the field, or to turn one long cable into two shorter ones using connectors and tooling compatible with typical 26 gauge mini coax.

For more information please click here.

CP-GM/GF (M)

Plenum Rated M Series VGA (HD-15) Male-Female Cable

Kramer M Series premium quality cables are constructed of plenum rated multi-conductor cable terminated with molded 15-pin HD connectors at each end. They offer outstanding durability and high performance for any computer graphic video signal application where a plenum rating is required.

For more information please click here.

CP-GM/GF

Plenum Rated Backshell Style VGA (HD-15) Male-Female Cable

Kramer CP-GM/GM and GM/GF series premium quality cables are constructed of plenum rated multi-conductor cable terminated with metal backshell style 15-pin HD connectors at each end. They offer outstanding durability and high performance for any computer graphic video signal application where a plenum rating is required.

For more information please click here.

CP-GM/GM

Plenum Rated Backshell Style VGA (HD-15) Male-Male Cable

Kramer CP-GM/GM and GM/GF series premium quality cables are constructed of plenum rated multi-conductor cable terminated with metal backshell style 15-pin HD connectors at each end. They offer outstanding durability and high performance for any computer graphic video signal application where a plenum rating is required.

For more information please click here.

CP-3RVM/3RVM

Plenum Rated Component Mini High Resolution Cable

Kramer plenum rated component video cables are constructed of mini coax cable terminated with molded male RCA connectors at each end. They offer outstanding durability and high performance for any analog component video signal application where a plenum rating is required.

• Plenum Rated - The low smoke and fire-resistant properties of plenum rated cable allow it to reside in air return spaces of ceilings, floors, and walls, often saving the cost of installing conduit.
• Quality Construction - Constructed from flexible, high quality plenum rated cable containing mini coaxes.
• Cable Specs - See Kramer BCP-5X bulk cable for detailed specs.
  Ideal for routing typical component video signals in professional A/V systems.
• Supports standard definition or HDTV resolutions.

For more information please click here.

CP-3RVAM/3RVAM

Plenum Rated AV Cable

Kramer plenum rated video/audio cables are constructed of mini coax cable terminated with 3 molded male RCA connectors at each end. They offer outstanding durability and high performance for any video/audio signal application where a plenum rating is required.

• Plenum Rated - The low smoke and fire-resistant properties of plenum rated cable allow it to reside in air return spaces of ceilings, floors, and walls, often saving the cost of installing conduit.
• Quality Construction - Constructed from flexible, high quality plenum rated cable containing mini coaxes. Gold plated contacts for corrosion resistance, long life, and precise connections.
• Cable Specs - See Kramer BCP-5X bulk cable for detailed specs.
  Ideal for routing typical composite video and dual RCA stereo audio signals in professional A/V systems.

For more information please click here.

C-GM Series

15-pin HD to Bare End Installation Cables

Kramer computer graphics video installation cables are constructed of 5 mini coax cables in a single jacket with a 15-pin HD (M) connector at one end and 5 bare mini coax cables at the other. They are used for cable runs which require an easier pull through walls, conduit, furniture, etc. Click for installation instructions

• Quality Construction - Molded male 15-pin HD connector installed on one end, and the corresponding RGBHV coaxes exposed and pre stripped and tinned at the other end.
• Easy Installation - Pre-stripped and tinned conductors at the bare end provides the easiest possible installation of a 15-pin HD connector, or to the back side of a Kramer wall plate with terminal blocks. For typical 5 BNC installation, just cut and prep the coaxes as usual for crimp or compression connectors on 26/28 gauge mini coax.
• Cable Specs - See Kramer BC-5X for detailed cable specs.
• Varied Selection of Lengths - Available in 15, 25, 35, 50, 75, 100, and 150 foot lengths (4.5 to 45 meters).

For more information please click here.

C-GM/5BM, C-GM/5BF & C-GF/5BM Series

15-pin HD to 5 BNC Breakout Cables

Kramer’s computer graphics video breakout cables are constructed of 5 mini coax cables with a molded 15-pin HD (M or F) on one end and 5 BNC (M or F) on the other. They are used to convert between the two most common cabling formats used for routing computer graphic video signals, 15-pin HD, and 5 BNC.

• Quality Construction - Constructed using Kramer BC-5X high resolution mini coax cable, terminated with molded 15-pin HD connector on one end and 75Ω BNC connectors on the other.
• Easy Installation - Models 6ft or longer have an 18 inch (460mm) long spread at the 5 BNC end to fit large routers/switchers.
• Cable Specs - See Kramer BC-5X for detailed cable specs.
• Varied Selection of Lengths - Available in all common gender variations in lengths ranging from 1 to 50 feet (0.3 to 15 meters).

For more information please click here.

C-GMA/GMA Series

15-pin to 15-pin & Audio Cables

Kramer’s GMA series are high performance cables with male 15-pin HD and 3.5mm stereo audio connectors at each end. They are perfect for computer graphics video to display installations which require an audio signal as well.

• Quality Construction - Constructed using our rugged and flexible 14 conductor cable.
• Easy Connection - Pre-terminated with molded 15-pin HD connectors (male to male), gold plated pins and thumbscrews for easy connection and a 3.5mm stereo mini jack.
• Easy Installation - Audio leads extend 8 inches (20 cm) beyond the 15-pin HD connector on one end and 24 inches (61 cm) on the other.
• Cable Specs - See Kramer BC-3X2T7S for detailed cable specs.
• Varied Selection of Lengths - Available in 3, 6, 10, 15, 25, 35, 50, and 75 foot lengths (0.9 to 23 meters).

For more information please click here.

C-MGMA/MGMA Series

Micro VGA + Audio Cables

Kramer’s Micro VGA + Audio cables provide high performance and flexibility. These thin cables constructed of 5 micro coax for the RGBHV signals additional wires and twisted pair passing ID bits and audio signals and pre-terminated with molded 15-pin HD connectors (Male to Male) and a 3.5mm stereo mini jack, are flexible to make installations easy and neat.

• Outer diameter of 6.0mm (0.236 inch).
• All 15 pins are passed through the cable.
• The audio leads are 61.0 cm (24 inch) long at one end and 20.3 cm (8 inch) on other end.
• These cables are ideal for video presentations, home theater and any installations in tight spaces.
• Use these cables with our table solutions for your comfort and efficiency.

For more information please click here.

C-GM/3RVM & C-GM/3RVF Series

15-pin HD to 3 RCA Breakout Cables

Kramer’s computer graphics video to component video breakout cables are constructed of 3 mini coax cables with a 15-pin HD (M) connector on one end and 3 RCA (M or F) connectors on the other. These cables can be used when a source or display can be configured to send or receive either computer graphics video or component video signals - for example, Kramer’s VP-724xl scaler uses this adapter to support its HDTV output modes.

• High Quality Construction - Rugged and high resolution 3 mini coax cable with molded connectors.
• Numerous Applications - Allow Kramer 15-pin HD distribution amplifiers, switchers and scaler switchers to be used to route component video signals.
• Varied Selection of Lengths - Male 15-pin HD to female RCA’s version available in 1 ft length (0.3 meters). Male 15-pin HD to male RCA’s version available in 3 or 6 foot lengths (0.9 or 1.8 meter).

For more information please click here.

C-GM/GM & C-GM/GF Series

15-pin HD to 15-pin HD Cables

Kramer’s GM/GM and GM/GF computer graphics videocables are high performance cables with molded 15-pin HD connectors on both ends. They are used for connecting computer graphics video signals between computers or video scalers and plasma, LCD or other popular display technologies.

• Quality Construction - High resolution 26 gauge mini coax for video.
• Easy Installation - Pre-terminated with molded 15-pin HD connectors, gold plated pins and thumbscrews for easy connection.
• Cable Specs - See Kramer BC-3X2T7S for detailed cable specs.
• Varied Selection of Lengths - Male/Male versions available in 1, 3, 6, 10, 15, 25, 35, 50, 75, 100, and 150 foot lengths (0.3 to 45.4 meters). Male/Female versions available in 3, 6, 10, 15, 25, 50, 75, and 100 foot lengths (0.9 to 30 meters).

For more information please click here.

C-MGM/MGM

Micro VGA Cable

Kramer’s Micro VGA cables provide high performance and flexibility. These thin cables constructed of 5 micro coax (32 AWG) for the RGBHV signals and additional wires passing all ID bits, pre-terminated with molded 15-pin HD connectors (Male to Male), are flexible to make installations easy and neat.

• Outer diameter of 5.4mm (0.212 inch).
• All 15 pins are passed through the cable.
• The HD-15 connectors are specially designed with small profile to fit any high density installation.
• Ideal for video presentations, home theater and any installations in tight spaces.
• Use these cables with our table solutions for your comfort and efficiency.

For more information please click here.

C-FM4/FM4 Series

4-pin to 4-pin FireWire® Cables

The Kramer FM4/FM4 cables are high performance cables with 4-pin FireWire connectors at both ends. They are used primarily for data transfer (IEEE 1394) at speeds up to 400Mbps between multimedia devices such as digital cameras, VCRs, CD drives, hard disks, scanners, graphic cards and editing systems.

• Quality Construction - Constructed using two separately double-shielded data cables, in an overall double-shielded outer jacket.
• High Quality Connectors - Molded 4 pin connectors on both ends. The 4 pin connector is popular on cameras and other small devices due to its compact size, but does not support power transmission.
• Varied Selection of Lengths - Available in 3, 6, 10, 15, and 25 foot (0.9 to 7.6 meters) lengths.

For more information please click here.

C-FM6/FM6 Series

6-pin to 6-pin FireWire® Cables

The Kramer FM6/FM6 cables are high performance cables with 6-pin FireWire connectors at both ends. They are used primarily for data transfer (IEEE 1394) at speeds up to 400Mbps between multimedia devices such as digital cameras, VCRs, CD drives, hard disks, scanners, graphic cards and editing systems.

• Quality Construction - Constructed using two separately double-shielded data cables and a 22 gauge pair for power transmission, all in an overall doubleshielded outer jacket.
• High Quality Connectors - Has molded 6 pin connectors on both ends. The 6 pin connector is popular on larger devices like computers because it offers full support of high speed data transmission, and the ability to power a device downstream.
• Varied Selection of Lengths - Available in 3, 6, 10, 15, and 25 foot (0.9 to 7.6 meters) lengths.

For more information please click here.

C-FM6/FM4 Series

6-pin to 4-pin FireWire® Cables

The Kramer FM6/FM4 cables are high performance cables with 6-pin FireWire connectors at one end, and a 4-pin connector at the other. They are used primarily for data transfer (IEEE 1394) at speeds up to 400Mbps between multimedia devices such as digital cameras, VCRs, CD drives, hard disks, scanners, graphic cards and editing systems.

• Quality Construction - Constructed using two separately double-shielded data cables, in an overall double-shielded outer jacket.
• High Quality Connectors - Has a molded 4 pin connector on one end, and a molded 6 pin connector on the other. The 4 pin connector is popular on cameras and other small devices due to its compact size, but PCs and other larger devices often use the 6 pin.
• Varied Selection of Lengths - Available in 3, 6, 10, 15, and 25 foot lengths (0.9 to 7.6 meters).

For more information please click here.

C-A35M/IRR

Infrared Receiver Cable

The C-A35M/IRR is an IR receiver cable designed as a companion to a Kramer infrared repeater such as the PT-4iREX. It is used to connect the external remote IR receiver to the PT-4iREX.

For more information please click here.

C-A35M/2IRE

Dual IR Emitter Cable

Kramer’s A35/2IRE is a dual Infrared emitter permanently mounted to a 3 meter cable.

For more information please click here.

C-A35M/IRE

IR Emitter Cable

Kramer’s A35/IRE is an Infrared emitter permanently mounted to a 3 meter cable.

For more information please click here.

C-A35F/2RM

3.5mm Audio to 2 RCA Male Cable

The Kramer C-A35F/2RM is a simple adapter cable which has a 3.5mm female connector at one end and 2 RCA male connectors at the other. It is 1 foot in length and provides passive conversion of an unbalanced line level stereo audio signal.

• Quality Construction - Molded male dual RCAs on one end and molded female 3.5mm on the other.
• High Quality Connectors - RCA connectors are color coded red, white to match audio connectors on typical equipment.

For more information please click here.

C-A35M/A35M Series

3.5mm Audio to 3.5mm Mini Audio Cables

Kramer A35M/A35M series mini audio cables are constructed from high quality “shielded pair” style cable terminated with molded male 3.5mm stereo connectors on both ends.

• Quality Construction - Constructed from flexible, high quality 28 gauge cable for transparent performance with line level audio signals.
• Numerous Applications - Ideal for use with typical computer sound cards, projectors, portable music players, etc. Also great for serial or IR remote control which often uses shielded pair wire for transmission of Transmit, Receive, Ground signals.
• Varied Selection of Lengths - Available in 3, 6, 10, 15, 25, 35, and 50 foot lengths (0.9 to 15 meters).

For more information please click here.

C-A35M/A35F Series

3.5mm Male to 3.5mm Female IR Extension Cables

Kramer A35M/A35F cables constructed of 3 conductor cable with a male 3.5mm connector at one end and a female 3.5mm connector at the other They are an outstanding solution for extending the cable length of infrared emitters and sensors.

• Quality Construction - Molded mono 3.5mm (1/8 inch) connectors, male on one end, female on the other.
• Varied Selection of Lengths - Available in 15 meter (50ft) and 20 meter (65ft) lengths

For more information please click here.

C-5BM/5BM Series

5 BNC to 5 BNC Cables

Kramer 5BM series cables are constructed of 5 mini coax cables in a single jacket with 75 ohm BNC connectors at each end. They offer outstanding quality, durability, and high performance for any RGBHV video signal application.

• Quality Construction - Constructed from flexible, high quality 5 mini coax cable.
• Applications - Ideal for routing typical computer graphics video RGBHV signals to display devices such as projectors and monitors.
• Easy Installation - Breakout length is 18 inches on any cables 6 ft or longer. Shorter cables have approx 10 inch breakout length.
• Cable Specs - For detailed cable specs see Kramer BC-5X.
• Varied Selection of Lengths - Available in 3, 6, 10, 15, 25, 35, 50, 75, and 100 feet (0.9 to 30 meters).

For more information please click here.

C-GM/5BM, C-GM/5BF & C-GF/5BM Series

15-pin HD to 5 BNC Breakout Cables

Kramer’s computer graphics video breakout cables are constructed of 5 mini coax cables with a molded 15-pin HD (M or F) on one end and 5 BNC (M or F) on the other. They are used to convert between the two most common cabling formats used for routing computer graphic video signals, 15-pin HD, and 5 BNC.

• Quality Construction - Constructed using Kramer BC-5X high resolution mini coax cable, terminated with molded 15-pin HD connector on one end and 75Ω BNC connectors on the other.
• Easy Installation - Models 6ft or longer have an 18 inch (460mm) long spread at the 5 BNC end to fit large routers/switchers.
• Cable Specs - See Kramer BC-5X for detailed cable specs.
• Varied Selection of Lengths - Available in all common gender variations in lengths ranging from 1 to 50 feet (0.3 to 15 meters).

For more information please click here.

C-BM/BM Series

1 BNC to 1 BNC Cables

Kramer BM series cables are constructed of high performance RG-6 cable with 75 ohm BNC connectors at each end. They offer outstanding quality, durability, and high performance for any video signal application.

• Quality Construction - RG-6 cable for the highest resolution signals.
• High Quality Connectors - True 75 ohm BNC connectors maintain correct impedance end-to-end.
• Cable Specs - See Kramer BC-1X bulk cable for detailed specs.
• Varied Selection of Lengths - Available in 1.5, 3, 6, 10, 15, 25, 35, 50, 75, 100 and 150 foot versions (0.45 to 45 meters).

For more information please click here.

C-SM/2BM & C-SM/2BF

s-Video to 2 BNC Breakout Cables

Kramer’s s-Video (Y/C) breakout cable is constructed of dual mini coax cables with a male s-Video (4-pin) connector on one end and 2 BNCs on the other. They are used for converting an s-Video signal from the typical 4 pin format to higher quality dual BNC format preferred for long cable runs.

• Quality Construction - Luminance (Y) and Chrominance (C) signals are passed through a high quality 26 AWG dual coax cable terminated with 4-pin mini DIN and high quality BNC connectors.
• High Quality Connectors - Gold plated S-Video connectors for corrosion resistance and best possible connection, and 75 ohm BNCs for correct impedance matching.
• Flexible Applications - Perfect for integrating consumer products into commercial display systems.
• Varied Selection of Lengths - Available in 1 or 6 foot versions and your choice of male BNC’s (C-SM/2BM-X) or female BNC’s (SM/2BF-X).

For more information please click here.

C-4LC/4LC Series

All Fiber Optic Cables

Kramer 4LC fiber optic cables are constructed of 4 individual color coded multimode 50/25um simplex cables of diameter 2.0mm each, contained in a round overall orange jacket. They are intended primarily as companion to various Kramer detachable transmitter/receiver sets.

• Quality Construction - Sub-cables are color coded: red, green, blue and orange and are terminated with the popular LC connectors for easy installation and are shipped with dust caps at the ends.
• Numerous Applications - Use these cables to connect our optical transmitter and receivers for DVI and HDMI, such as: 610 T/R, 621 T/R and 631 T/R, and the model 648 FireWire repeater.
• Varied Selection of Lengths - Available in lengths ranging from 10 - 300 meters (33 to 990ft), and by special order up to 500 meters (1,650ft).

For more information please click here.

C-HDMI/HDMI/FLAT

Flat HDMI Cable

Kramer’s flat HDMI cable is designed for “invisible” and long distance installations. Go through the wall, under the carpet, around corners and behind the entertainment system with ease. The flat design of the cables renders them unobtrusive.

• Quality Construction - Constructed from flexible flat cable structured to have less crosstalk and interference than with traditional round HDMI cables
• High Quality Connectors - Gold plated connectors resist corrosion, cut down on impedance and offer the best possible connectivity
• High Resolution - the cables are capable of carrying extremely high bandwidth signals, including 1080p over longer runs than conventional designs, without signal degradation

For more information please click here.

C-FOHM/FOHM Series

Fiber Optic/Copper Hybrid HDMI Extension Cables

Kramer’s new all HDMI cable system is constructed of high performance hybrid cable containing fiber optic and copper wires terminated with HDMI connectors on each end. Transmitter and receiver modules are built in to the cable allowing HDMI signals to be sent long distances with pristine digital image quality.

• Quality Construction - Pristine digital transmission of HDMI signals at distances from 10 meters (33ft) to 100 meters (330ft).
• High Resolution - Compatible with all HDTV standards up to 1080p and all VESA resolutions up to WUXGA (1920x1200) at 60Hz refresh rate with 1 pixel/clock mode.
• Flexible Power Options - Uses +5V internal power supplied via the HDMI/DVI graphic source to power the transmitter and receiver or from the provided external +5V power adapter.
• HDCP Compliant - FODM cables are also compatible with the HDMI interface standard and are HDCP compliant.
• It can use either +5V_internal power supplied via the HDMI / DVI graphic source, or from the external +5V power adapter.
• Varied Selection of Lengths - Available in 10, 20, 30, 50 and 100 meters (33 to 330ft) lengths.

For more information please click here.

C-HDMI/HDMI Series

HDMI to HDMI Cables

Kramer HDMI cables are high performance cables with molded HDMI connectors at both ends. HDMI standard supports high definition video plus multi-channel audio in a single cable.

• Quality Construction - Kramer’s new High Definition Multimedia Interface (HDMI) cables provide an uncompressed digital link between consumer electronics equipment such as DVD players, set-top boxes and audio/video monitors such as plasma display screens for high-definition TVs.
• High Quality Connectors - Gold plated connectors resist corrosion, and offer the best possible connectivity.
• HDCP Compliant - HDMI cables are also compatible with the HDMI interface standard and are HDCP compliant.
• Varied Selection of Lengths - Available in 3, 6, 10, 15, 25, 35 and 50ft (0.9 to 15 meters).

For more information please click here.

C-HDMI/DVI Series

HDMI to DVI Cables

The Kramer HDMI/DVI series are high performance cables with HDMI connectors at one end and a DVI connector at the other. They are designed to connect between digital video sources and displays and recorders that don’t have both DVI and HDMI connectors.

• Quality Construction - HDMI to DVI single link (18 +1 pin) cable provides excellent conductivity at high frequencies and longevity without degradation.
• High Quality Connectors - The connectors are gold plated for corrosion resistance and best possible connection quality.
• HDCP Compliant - HDMI cables are also compatible with the HDMI interface standard and are HDCP compliant.
• Varied Selection of Lengths - Available in 3, 6, 10, 15, 25, 35 and 50ft lengths (0.9 to 15 meters).

For more information please click here.

AD-DM/HF

Kramer's AD-DM/HF is Adapter of DVI Male to HDMI Female

For more information please click here.

2550 Series

High-End Crimp Style BNC Connector

Kramer’s true 75Ω BNC crimp connectors provide quick and reliable connection and produce maximum performance for today’s high analog and digital transmission.

For more information please click here.

2920 Series

Color Rings

Kramer's color rings for marking the radial connectors allow one to retrofit connectors quickly and easily. Available in: red, green, blue, yellow and white. One hundred rings per package.

For more information please click here.

2551 Series

VGA Connectors

Kramer offers an expanded range of 15-pin high density (VGA type) connectors designed to be installed on Kramer or other compatible bulk cables. Choose from typical solder style male or female connectors, or a new "crimp" system for simple and faster construction. Male pins for both systems are gold plated to resist corrosion and provide the best performance possible. The metal hoods fit both styles and genders of Kramer 15-pin HD connector bodies, and are designed with an opening which accommodates cables of approximately 10mm outer diameter. If one's cable has a 9mm outer diameter, one just needs to order the available grommet (part #2551-815009) in addition to the metal hoods.

Note that the bare end of Kramer’s C-GM-XX family of single-ended “installation cables” are pre-stripped, and pre-tinned for extremely easy installation using any of our 15-pin HD connectors, or the terminal blocks found on the back of many wall plate and frame/module products

For more information please click here.

Compression Connectors

Compression Connectors

Kramer's compression connectors reduce service calls by supplying stronger, more secure and longer lasting connections.

Kramer's compression connectors provide full 360 degree electrical continuity even under punishing conditions. Crafted to withstand 80lb (36.3Kg) of force. The radial design reduces the possibility of an impedance problem and can defeat ingress/egress at the connector. Internal "O" sealing rings prevent moisture migration, while the large ferrule surface insures proper RF and digital interface. The connectors don’t require soldering.

One compression tool for all connectors.
Color coded connectors.
Five connectors soled in package.

For more information please click here.

AD-HF/HF

Kramer's AD-HF/HF is Adapter for HDMI Female to Female

For further information click here

AD-DM/GF

Kramer's AD-DM/GF is Adapter for DVI-I Male to 15-pin HD Female

For further information click here

AD-DF/HM

Kramer's AD-DF/HM is Adapter for DVI Female to HDMI Male

For further information click here

AD-DM/HF

Kramer's AD-DM/HF is Adapter for DVI Male to HDMI Female.

For further information click here

AD-9DF/9DF

Gender Changer D9 Female/Female

AD-A35M/2RF

3.5mm Audio to 2xRCA-Female

For more information please click here.

AD-BF/RM

BNC-Female to RCA-Male (goldplated)

AD-BM/2BFY

BNC-Male to 2xBNC Female 'Y'

AD-BM/RF

BNC-Male to RCA-Female

AD-GM/GM

Gender Changer HD15 Male/Male

AD-9DM/9DM

Gender Changer D9 Male/Male

AD-BF/BF

BNC-Female to BNC-Female

AD-BM/2BFT

BNC-Male to 2xBNC-Female 'T'

AD-BM/75

BNC-Male Terminator 75 Ohm

AD-GF/GF

Gender Changer HD15 Female/Female

AD-RF/RF

RCA-Female to RCA-Female

BNC-RT

BNC Connector Removal Tool

Use for inserting and removing BNC connectors in high density or hard-to-reach locations. 12’’ (30.5 cm) long blade.

For more information please click here.

C-KLCT

Linear Compression Tool

This linear compression tool is designed for the professional installer and features the most rugged design in the industry. The solid-steel tool is virtually unbreakable.

Tool features:

• BNC, RCA and F radial connectors (To fit mini coax 22/26 AWG, RG-59 and RG-6 cables).
• One tool for all radial connectors.
• Effortless.
• One step operation.
• Fits in the palm of the hand.
• No adjustments required.
• Solid-steel construction.
• Self-adjusting design.

For more information please click here.

C-KRGBS

RG-56/9 RGB Professional Cable Stripper

This professional strip tool works for all of Kramer's 26/28 gauge mini coaxes, as well as RG-6 and RG-59. Prepping installed wire and cable in video/audio systems with the standard 1/4 inch, 1/4 inch format has never been easier or more consistent. One spare blade cartridge is included.

For more information please click here.

TBUS-1

Advanced Table Mount Cable Management Solution

Kramer’s new TBUS-1 is an outstanding furniture-mounted cable management solution. It is very high quality, aesthetic, and offers interchangeable connector modules to provide exactly the signal support required in any given professional A/V system.

• Versatile - Allows connection of any equipment to the room’s presentation system via cable access or passive interfaces.
• Elegant Rugged Design - It is a sturdy and attractive steel enclosure designed to provide maximum connectivity in the smallest possible footprint, at the same time cost-effective and easy to install.
• Easy Installation - Requires tools and expertise to cut a 5” x 7” (128mm x 179mm) rectangular hole in the surface of the furniture. Maximum table thickness is 1 5/8” (41mm).
• Easy Operation - Once installed, only the black-textured lid is visible with a special opening for cables to exit neatly. When not in use the lid closes to hide and protect cables and connectors.
• Versatile Connectivity - Provides an AC socket and six slots for Kramer connector insert modules. Two of the slots come already populated with cable pass through inserts and blank plates are installed in the remaining four slots in case some need to remain unpopulated.

For more information please click here.

TBUS-2

Table Mount Pass-Thru System with Hydraulic Tilt

The TBUS-2 is a rectangular table-mount cable management system for boardrooms and conference rooms. It opens/closes by pressing down gently on the lid which hydraulically raises the TBUS-2 connectors for easy access and connection.

Power source (AC power limits): 220-240V AC, 50/60Hz, 5A per connector

Dimensions: Including the outer rim: 25.3cm x 16.6cm x 18.4cm (9.97" x 6.53" x 7.25") W, D, H

Without the outer rim: 24.054cm x 15.613cm x 18.4cm (9.47" x 6.03" x 7.25") W, D, H

Weight: 1.15kg (2.53lbs) approx.

Accessories: Power cord

Options: Kramer inserts and interfaces

TBUS-3

Architectural Table Mount Interface

The Kramer TBUS-3 is a high quality anodised aluminium finished table-mount Interface system for boardrooms and conference rooms. Its attractive enclosure is designed to provide maximum connectivity in the smallest possible footprint.

• 4 Inputs - 15-pin HD, 3.5mm, USB-A & RJ-45
• Power Input - International, USA and European power sockets available
• Cover - Manually opens & closes
• Connector Depth - Adjustable
• Size - Top plate: 176mm x 140.4mm (6.9" x 5.5") W, D
  Enclosure: 136mm x 102mm x 130mm (5.4" x 4.0" x 5.1") W, D, H

TBUS-4

Architectural Table Mount Interface

• 8 Inputs - Two 15-pin HD, two 3.5mm, two USB-A & two RJ-45
• Power Inputs - International, USA and European power sockets available
• Wall Plate Insert Slots - Option to replace one of the power sockets with 2 wall plate Insert modules
• Cover - Manually opens & closes
• Connector Depth - Adjustable Size - Top plate: 243mm x 140.4mm (9.6" x 5.5") W, D
  Enclosure: 203mm x 102mm x 130mm (8.0" x 4.0" x 5.1") W, D, H

TBUS-5

Rectangular - Advanced Table Mount Management System

• 4 Inputs - 15-pin HD, 3.5mm, USB-A & RJ-45
• Power Input - International, USA and European power sockets available
• Retractable Lid - Manually slides into unit
• Connector Depth - Adjustable
• Installation - Requires a 6.22” (158mm) x 4.84” (123mm) cutout
• Dimensions - Top plate: 176mm x 140.4mm (6.9" x 5.5") W, D
  Enclosure: 154mm x 102mm x 130mm (6.1" x 4.0" x 5.1") W, D, H
  

TBUS-6

Advanced Table Mount Management Solution

• Connector Depth - adjustable.
• 8 Inputs - Two 15-pin HD, two 3.5mm, two USB-A & two RJ-45
• Power Input - International, USA and European power sockets available
• Wall Plate Insert Slots - Option to replace one of the power sockets with 2 wall plate Insert modules
• Retractable Lid - Manually slides into unit
• Dimensions - Top plate: 243mm x 140.4mm (9.6" x 5.5") W, D
  Enclosure: 221mm x 102mm x 130mm (8.7" x 4.0" x 5.1") W, D, H
  

TC-PTP01-B

Power Tower Plus Table Mount Cable Management Solution

Kramer’s new TC-PTP101-B Power Tower Plus is an outstanding table-mounted cable management solution. It is simple to install, high quality, aesthetic and supports the most common connections required in typical professional A/V systems.

• Versatile - Solves the main challenge faced by integrators by providing tabletop connectivity for computer graphics video, audio, network, and power in the most unobtrusive fashion possible.
• Elegant, Simple, and Cost Effective -The Power Tower Plus is a cylindrical shaped pull-up system constructed of black anodized aluminum and rugged black ABS plastic. It is designed to provide maximum connectivity in the smallest possible footprint, and to be cost-effective and very simple to install.
• Easy Installation - Requires only a 4 inch (102 mm) circle saw and a table with maximum thickness of 2 inches (51mm).
• Easy Operation - Once installed, simply press the rocking cover back, pull up the assembly to expose the connection panel, connect your cable(s), and push the assembly back down so that it is out of the way. The rocking cover will tilt to provide an exit path for the connected cables.
• Versatile Connectivity - The assembly provides one input socket of each: AC power, 15-pin HD female, 3.5mm stereo audio female, RJ-45 female, USB A female. On the underside are 3 meter (9.9ft) long cables corresponding to each input as follows: AC plug, 15-pin HD male, 3.5mm stereo male, RJ-45 male, and USB A male.

For more information please click here.