Assemblies

• Specials - made to order
• Quotation Request Form - Specials
• Kramer

Bulk Cable

• Control - Network cable
• Lutron lighting cable
• Kramer - RG-6 Super Hi Resolution cable
• Kramer - 2 core S-video cable
• Kramer - 5 core Mini coax high resolution cable
• Kramer - 5 core Mini coax high resolution cable + 5 singles
• 14 conductor Presentation cable

Cable is an important, but often overlooked component in a display system. An enormous amount of money is spent on purchasing computers, projectors, screens, control systems and other equipment, but not much thought goes into the cabling. Cable can be the weakest link in any chain of electronic devices. You may not notice the difference a poor quality cable makes to a Pal video image, but you will notice it when viewing a high resolution image especially when it is displayed on a large screen. An entire system can be adversely affected by the poorly performing cable.

To minimise signal loss for the best possible price, it is important to consider applicability, performance and user-friendly characteristics when choosing the appropriate cable. Most A/V systems require at least five conductors, more if audio or other signals need to be routed as well. High-resolution video signals are more sensitive to signal losses and require higher performance cables than do Pal signals. For long cable runs, a low loss cable is more appropriate.

Installer-friendly features, such as flexibility and durability translate into reduced installation time and effort. Superior flexibility makes a cable less vulnerable to stress from frequent and fast-paced jobs, such as rental and staging applications.

When choosing a cable, there may be specific fire code requirements to consider - please see our LS0H cable. The use of LS0H cable may also eliminate the need for conduit, so you would save on installation costs and time.

What's so special about RGB's cable assemblies?

Any length

• We will make cable assemblies to the exact length you need.
  
  Advantage: Saves you money as you don't have to pay for more cable than you need and ensures neat and tidy installation.

Any connector

• We will make cable assemblies with any connector at either end.
  
  Advantage: Eliminating the use of an adaptor or cable connector at one end of your cables saves you money, ensures a neat and tidy installation and helps to maintain quality and system reliability.

Bare Ends

• We will make cable assemblies with one end bare. We will also supply you with the connector and hood for the bare end
  
  Advantage: Save valuable time on site when routing cables through conduit and holes.

Wall/Floor Plates

• We will also terminate one end of the cable assembly with a connector pre-mounted onto a wall/floor plate
  
  Advantage: Provides you with a complete solution to take to site.

Quality/Reliability

• We only use good quality cable
• We have very high standards for the assembly itself
• We inspect and test each cable
  
  All going towards ensuring our cables will work first time and carry on working for the life of your installation.
  

Labelling

• We will label your cable with your part number, description or both at one or both ends if requested.
  
  Advantage: Helps to simplify and speed up the installation