78944

* New Product January 10 *

Xantech One Zone Four Source Connecting Block

• Connects four emitter ports and power supply to all Xantech infrared receivers and keypads
• Four parallel emitter ports with 470-Ohm resistors drive four single or four dual emitters
• Quick-connect stereo mini jack for IR Receivers that use a stereo mini plug
• STATUS terminal for connection of IR Receivers and Keypads that have status LED's
• 2.1 mm coaxial power jack
• Requires either the 781ERGPS or 782ERGPS power supply
• Dimensions: 3" x 1 3/4" x 13/16" (77mm x 45mm x 21mm)
• Power LED

Back to Top

78944CB5P

* New Product January 10 *

Xantech One Zone Four Source Connecting Block Five Pack

Save time and money. Includes five 789-44 connecting blocks

Back to Top

78944PSRP

* New Product January 10 *

Xantech One Zone Four Source Connecting Block Including Power supply

• 789-44 with included 781ERGPS Power Supply

Back to Top

79000

* New Product January 10 *

Xantech Multiple Emitter Connecting Block

• Emitter expansion block for the 791-44 or 792-10
• Parallel emitter ports drive 10 single or 10 dual emitters
• Contains a series 100-Ohm resistor per emitter port
• Emitter and IN/OUT ports are 3.5 mm mono mini-jacks
• Screw terminals provide for wired input connections
• Requires the 792-10 Power Module or the 791-44 Amplified Connecting Block to drive the 790 block
• Dimensions: 6" x 2 1/4" x 15/16" (153mm x 58mm x 24mm)

Back to Top

79144

* New Product January 10 *

Xantech One Zone Ten Source Amplified Connecting Block

• Emitter port jumpers permit high or low power IR outpout
• High-speed opto-isolator for improved operation
• Parallel emitter ports drive 10 single or 10 dual emitters
• Contains red LED input signal Test-IR
• Requires either the 781ERGPS or 782ERGPS Power Supply
• Dimensions: 6" x 2 1/4" x 15/16" (153mm x 58mm x 24mm)
• Up to nine 790-00's can be connected to the 791-44 for control of up to 100 devices in a single zone
• STATUS terminal for connection of Xantech IR Receivers and Keypads that have status indicator LED's
• Quick connect stereo mini jack for Xantech IR Receivers that use a stereo mini plug

Back to Top

CB12

* New Product January 10 *

Xantech CB12 One-Zone One Source Connecting Block

• Connects one emitter port and power supply to Xantech IR Receivers that use a stereo mini plug
• Also includes a three-terminal block for wired connection of Xantech IR Receivers and Smart Pads
• 3.5 mm stereo mini jack for quick-connect IR receivers
• 3.5 mm mono mini jack for one single or one dual emitter
• 2.1 mm coaxial power jack
• Requires either the 781ERGPS or 782ERGPS Power Supply Dimensions: 21/8" x 1 1/4" x 3/4" (54mm x 32mm x 19mm)

Back to Top

CB20

* New Product January 10 *

Xantech One Zone Two Source Connecting Block

• Connects two emitter ports and power supply to Xantech IR Receivers that use a stereo mini plug
• 3.5 mm stereo mini jack for quick-connect IR receivers
• Two 3.5 mm mono mini jacks with 470-Ohm resistors drive two single or two dual emitters
• 2.1 mm coaxial power jack
• Requires either the 781ERGPS or 782ERGPS Power SupplyDimensions: 2 1/8" x 1 1/4" x 3/4" (54mm x 32mm x 19mm)

Back to Top

CB60

* New Product January 10 *

Xantech One Zone Six Source Quick Connect Connecting Block

• Connects six emitter ports and power supply to all Xantech IR Receivers that use a stereo mini plug
• 3.5 mm stereo mini jack for quick-connect IR Receivers
• 3.5 mm mono mini emitter ports drive six single or six dual emitters in parallel
• Contains a series 100-Ohm resistor per emitter port
• Requires either the 781ERGPS or 782ERGPS Power Supply

Back to Top

CB18

* New Product January 10 *

Xantech "The Strip-IR" Parallel Connecting Block

• Easily connects home run wires from multiple IR Receivers to the input
• High current design (12 Amps peak) allows amplifiers rated as high as 500 watts to be used with the CB18
• One-in eight-out or eight-in one-out capability
• Nine four-terminal plug-in connectors on 4-conductor bus
• Screw terminals handle wire sizes from 24 to 12 gauge
• Dimensions: 111/4" x 1 1/4" x 1 1/4" (286mm x 32mm x 32mm)

Back to Top

78944DW - White

78944DI - Ivory

* New Product January 10 *

Xantech Single Zone In-Wall Decora Style Connecting Block

• Similar to the standard 789-44 but used in a single gang J-box configuration
• Can be used at either end of an infrared bus system
• Four parallel emitter ports on external connecting plate
• Quick connect stereo mini jack on external connecting plate for Xantech IR receivers that are
       equipped with the stereo mini plug
• 2.1mm coaxial power jack on external connecting plate
• Four-terminal plug in connector on the back of the plate for Power and IR Signal
• Available in white and ivory
• Dimensions: 2 15/16" W x 1 3/4" D x 13/16" H (75mm x 45mm x 21mm)

Back to Top

MW1S
MW1B

* New Product January 10 *

Xantech Emitter Wire Dressing - Silver
Xantech Emitter Wire Dressing - Black

Contains adhesive backed, custom sized molded pieces that makes installing mouse emitters fast, clean, and easy.

Package contains:

• 1" x1" dressing, thin size (Perfect for the first 3 feet of the emitter)
• 1" x 1" dressing, wider size (Intended for the last 3 feet of the emitter)
• 1"x 5" dressing, thin size (Perfect for the first 3 feet of the emitter)
• 1" x 5" dressing, wider size (Intended for the last 3 feet of the emitter)

Back to Top

28DES

* New Product January 10 *

Xantech Designer Emitter Shield

• Effective for covering component IR eyes for IR
• Shield cover for designer emitters

Back to Top