|
‘Time is
Money’ |
|
|
Labour
saving solutions for mounting projection screens: |
|
|
Flexible mounting brackets The ‘Salara’
& ‘Silhouette’
roller screens and the ‘Clarion’
and ‘Onyx’
frame screens all include flexible mounting brackets that enable the
installer to quickly mount and change the horizontal position of the screen
if necessary. The brackets are
fixed to the wall not the screen so the screen can slide left or right, even
when attached to the brackets. |
|
|
Plug & Play screens Using a
‘Salara’
plug & play screen which has a Using
an IR remote also avoids the need to spend time channelling out a cable and
socket for the control switch. |
|
|
Ship the housing ahead of the screen When
using an ‘Access’
or ‘Silhouette’
series, shipping the housing in advance so the ceiling contractors can fit it
whilst they are fitting the ceiling. That’s
one fix on site, not two. Saving time lost between the two. Also saves the
second trip to site. |
|
|
Use a ceiling trim kit The ‘Ceiling
Trim Kit’ provides a quick, low cost, solution for mounting the ‘Premier’
of ‘Targa’
roller screens above the ceiling. The Kit removes
the uncertainty for the installer about where to create the hole
in the ceiling and helps decide the position, width & length of the slot
that the screen will drop through. Avoids in-filling and re-plastering
of the ceiling. |
|
|
They think about
the installer when they design their screens. Who are they?
For
further information on Draper screens and lifts, please click here Call us on 0844 8800765 or +44 (0)1488 73366
and we will recommend the most appropriate solution for your
application |
|
